AC Schnitzer Mega Sale!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DarkWing6
    Moderator
    • Apr 2004
    • 7144

    #1

    AC Schnitzer Mega Sale!

    I've decided to take a different direction with my car, so I'm going to sell all the ACS goodies I have accumulated over the past few years. This took a ton of searching and the pieces were pulled together from about 5 different places (some across the pond). In addition to what is listed below, I also have some ACS Type I 16x7.5 4x100 wheels for sale in the wheel and tire section.

    Pictured below is an entire AC Schnitzer body kit for a late model E30.
    Included are:
    Front Lip - Needs repair, but a very reputable local body shop said they can repair it as good as new w/ paint for ~$250. So not too bad... especially for a front lip.
    Side Skirts - These are in great shape. You will notice one has a slight bend in it (I assume from storage before I got it). This is very minor and should easily straighten out when bolted up to the car. The finish is nice. If you car was black you could probably just bolt these right up.
    Rear Apron - This is in very good shape with no major cracks or blemishes. Typical prep work for paint would fix any of the minor abrasions, which are only in the paint.
    Rear Spoiler - This is brand new. It still has the stickers on it.

    I'm looking to get $1500 for the entire kit. I'd prefer not to split this up since it was so difficult to put together in the first place.

    Not pictured:
    ACS Exhaust Tip - This is in pretty good shape with typical scratches on the underside. I've only seen two of these (I own both) and both had these scratches. The tip was cutoff from where it leaves the muffler, so plenty of extra for you to weld up to your exhaust. $125
    ACS Catback Exhaust - From the muffler back this in really good shape. The mid-pipe area has some damage and I'm pretty sure isn't original, but all the important stuff (muffler and tip) is still intact and in good shape. This video is of the exhaust on my car. I'm still not sure if I'll be selling the full exhaust yet, so this is in feeler stage. Make an offer to put me over the edge. ;)




    I'd prefer to sell local, but I'm willing to ship at the buyers expense.



    Sorry about the bad pics. It is freakin' cold outside, so they were taken in my poorly lit storage area. More pics available upon request.

    Everything
    Click image for larger version

Name:	ACS_All.jpg
Views:	1
Size:	84.8 KB
ID:	7213988
    Front Lip
    Click image for larger version

Name:	Lip1.jpg
Views:	1
Size:	66.2 KB
ID:	7213989
    Lip Corner
    Click image for larger version

Name:	Lip2.jpg
Views:	1
Size:	59.3 KB
ID:	7213990
    Other Lip Corner
    Click image for larger version

Name:	Lip3.jpg
Views:	1
Size:	58.4 KB
ID:	7213991
    sigpic
  • namsayin
    E30 Mastermind
    • Mar 2009
    • 1568

    #2
    nice man! GLWS

    Comment

    • SpecRaceM5
      E30 Modder
      • Dec 2003
      • 956

      #3
      Oh man. If only I had a money tree, I would buy the lot. Good luck with the sale. It hurts to see the stuff available with no cash to purchase.

      Comment

      • ck_taft325is
        R3V OG
        • Sep 2007
        • 6880

        #4
        Originally posted by SpecRaceM5
        Oh man. If only I had a money tree, I would buy the lot. Good luck with the sale. It hurts to see the stuff available with no cash to purchase.

        A-fucking-men. :(
        Need a part? PM me.

        Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

        Comment

        • DarkWing6
          Moderator
          • Apr 2004
          • 7144

          #5
          Thanks guys...

          If anyone has an E30 M3 5 Lug setup they'd be willing to trade, I'd be interested in that.
          sigpic

          Comment

          • robrez
            No R3VLimiter
            • Jul 2008
            • 3376

            #6
            Awmann! First the complete Hartge, now this. I wish I had a complete body kit instead of a mishmash of pieces.
            sigpic
            January 2012 COTM

            Comment

            • jasonslackisrad
              Wrencher
              • Jun 2009
              • 269

              #7
              would you be able to take a better pic of the exhaust tip? just wanna see how it fits in the cutout.

              THX.

              Comment

              • flyboyx
                R3V OG
                • Sep 2008
                • 8371

                #8
                if you split, i want to be first in line for the rear valance.
                sigpic
                Gigitty Gigitty!!!!

                88 cabrio becoming alpina b6 3.5s transplanted s62
                92 Mtech 2 cabrio alpinweiss 770 code
                88 325ix coupe manual lachsilber/cardinal
                88 325ix coupe manual diamondschwartz/natur
                87 e30 m3 for parts lachsilber/cardinal(serial number 7)
                12 135i M sport cabrio grey/black

                Comment

                • Chachi
                  Mod Crazy
                  • Sep 2006
                  • 668

                  #9
                  pmed
                  Originally posted by blunt
                  i called my 17 yo paperboy "sugartits" in a christmas card 3 years ago. he never came back and im not joking.

                  Comment

                  • theox69
                    E30 Mastermind
                    • May 2008
                    • 1732

                    #10
                    That exhaust sounds pretty nice!

                    Originally posted by Janderson
                    you can have the keys to my hunk of 20+ year old West German steel when you pry them from my cold dead fingers.

                    Comment

                    • drumad
                      E30 Mastermind
                      • Aug 2009
                      • 1700

                      #11
                      AHHHH i have everything but the front lip.. how the hell did you source one.

                      if you ever part... I'll take the front obviously :P
                      2008 335i - n54b30
                      1991 318i - m52b28
                      1994 fzj80 - LAND CRUSHER

                      Comment

                      • Farbin Kaiber
                        Lil' Puppet
                        • Jul 2007
                        • 29502

                        #12
                        Noes.

                        Comment

                        • AL FHA Q!
                          Grease Monkey
                          • Feb 2008
                          • 390

                          #13
                          nice! GLWS
                          sigpic

                          Comment

                          • DarkWing6
                            Moderator
                            • Apr 2004
                            • 7144

                            #14
                            Originally posted by jasonslackisrad
                            would you be able to take a better pic of the exhaust tip? just wanna see how it fits in the cutout.

                            THX.
                            Ya, I'll bring it home from work with me tonight. I might not have the picture up until late tonight or tomorrow though.


                            Originally posted by flyboyx
                            if you split, i want to be first in line for the rear valance.
                            Originally posted by drumad
                            AHHHH i have everything but the front lip.. how the hell did you source one.

                            if you ever part... I'll take the front obviously :P
                            Sorry to say, I don't think I will be splitting it up. Anyone that is interested in certain parts you can PM me an offer for the piece(s). In the outside chance that I end up finding individual buyers for all the parts I will contact each of you. If two or more people make offers on the same piece I will give the first person to make an offer a chance to match a later offer that may be higher.
                            sigpic

                            Comment

                            • DarkWing6
                              Moderator
                              • Apr 2004
                              • 7144

                              #15
                              Here are the pics of the exhaust tip. Basically you could cut and weld any of the black area to make it fit with the exhaust setup you have.


                              Full
                              Click image for larger version

Name:	Tip1.jpg
Views:	1
Size:	47.8 KB
ID:	7116605

                              Looking In
                              Click image for larger version

Name:	Tip2.JPG
Views:	1
Size:	89.8 KB
ID:	7116606

                              The Back
                              Click image for larger version

Name:	Tip3.JPG
Views:	1
Size:	76.8 KB
ID:	7116607
                              sigpic

                              Comment

                              Working...