this kit is a Full pnp e30 obd1 m50tu swap harness kit (also m52, s50 and s52 with custom program chip)
AND a e30 to e36 adapter harness for 87-91 325 I or IS and 91-93 318I or IS . Note* will work on early cars but adapter harness will have to be repined, for later models like the eta or e for early 318i or 325e different e30 side plug will be needed. (just let me know the year of your e30 and model
*what does this kit support *
Support oil level check control on your obc check engine light (stomp test will also work!!)
Oil service indicator on cluster, (indicator will also be resetable with service tool)
e30 coolant temp on cluster will also work correctly with swap
oil psi light ( ie the dummy light)
fuel economy gauge ( note will not be accurate unless you buy the converter)
Note* (the kit does not support a/c or cruse control systems)
*what is in the kit *
* Note (Harness uses stock e30 325i main power wire from terminal to starter)
Only other parts needed for the kit is a stock m50 02 sensor, m50 air temp sensor and a e30 coolant (gauge brown one pole) sensors and e36 (blue 2 pole dme) coolant sensor
At this time I only have one (1) full kit for and I do not want to separate it
$550 +shipping
But I do have 2 other e36 m50tu uncut harness and plenty of e30m50 adapters harness pm me for more info
here are a few pics of one of the kits installed on my old m52 swap
IF you need pics of the kit its self pm me
http://i8.photobucket.com/albums/a35...l/PICT0162.jpg
http://i8.photobucket.com/albums/a35...l/PICT0163.jpg
Thanks pleas pm or email me at
Nitroman12@gmail.com
AND a e30 to e36 adapter harness for 87-91 325 I or IS and 91-93 318I or IS . Note* will work on early cars but adapter harness will have to be repined, for later models like the eta or e for early 318i or 325e different e30 side plug will be needed. (just let me know the year of your e30 and model
*what does this kit support *
Support oil level check control on your obc check engine light (stomp test will also work!!)
Oil service indicator on cluster, (indicator will also be resetable with service tool)
e30 coolant temp on cluster will also work correctly with swap
oil psi light ( ie the dummy light)
fuel economy gauge ( note will not be accurate unless you buy the converter)
Note* (the kit does not support a/c or cruse control systems)
*what is in the kit *
- Full Obd1 e36 harness w/added circuit for oil level sender that is fully label ready for install, also modification to harness so that the service indicator can also be reset w/tool
* Note (Harness uses stock e30 325i main power wire from terminal to starter)
- 413 red label dme (no $100+ ews delete chip needed)
- Stock m50 obd maf
- e36 2x nock sensors
- e36 crank sensor
- e36 cam sensor
- e36 iac
Only other parts needed for the kit is a stock m50 02 sensor, m50 air temp sensor and a e30 coolant (gauge brown one pole) sensors and e36 (blue 2 pole dme) coolant sensor
At this time I only have one (1) full kit for and I do not want to separate it
$550 +shipping
But I do have 2 other e36 m50tu uncut harness and plenty of e30m50 adapters harness pm me for more info
here are a few pics of one of the kits installed on my old m52 swap
IF you need pics of the kit its self pm me
http://i8.photobucket.com/albums/a35...l/PICT0162.jpg
http://i8.photobucket.com/albums/a35...l/PICT0163.jpg
Thanks pleas pm or email me at
Nitroman12@gmail.com
Comment