WTT: 3.25LSD for a 3.73LSD, local to CT

[BenM]

Anyone doing an M5X/S5X with a ZF or Getrag 250 thats in need of a good ratio? In great shape, makes a little bit of noise around 80mph, but still locks up nice and tight. I believe I painted it, but can't remember since its still under the car.

Lets try to keep this local to CT for now (or NY, NJ, MA, RI, NH, VT, ME). PM me.

Thanks,
Ben

[richardb]

I would trade you for my small case 4.10 lsd but even if you agreed I have very little time to do the swap

[BenM]

Sorry, not interested in a 4.10, let alone a small case diff. Just looking to go to a decent 3.73LSD.

[ck_taft325is]

If you decide to cross state lines, I'd trade out as I'm playing at organizing a turbo setup.

[e30polak]

3.73+ZF = retarded.

Are you switching back to a G260 Ben? If you're going 6 speed, then the gearing will still be worthless, because 1st-5th are almost identical to the 5spd ZF.

If you're doing either of those options, then you will regret your choice.

[BenM]

3.73+ZF = retarded.

Are you switching back to a G260 Ben? If you're going 6 speed, then the gearing will still be worthless, because 1st-5th are almost identical to the 5spd ZF.

If you're doing either of those options, then you will regret your choice.

Haha true that, but this is an M20 car. :)

I swapped over to the 3.25lsd from the open 3.73 for winter driving, but would much prefer a 3.73LSD. My M50 car currently has a recently rebuilt diffsonline 3.46LSD. :D

[BenM]

ttt.

[White325is]

I know a guy who would be down for this.
LEt me shoot him a txt..

[e30turboboy]

pm'd

[BenM]

I know a guy who would be down for this.
LEt me shoot him a txt..

Thanks dude.

pm'd

replied.

[White325is]

E30turboboy is the person I told about the dif.

[MIKe30]

If it falls through with e30turboboy shoot me a pm.

[BenM]

If it falls through with e30turboboy shoot me a pm.

Will do.