Fs: Bbs rs 025 bnib!!!

[///schwartzman]

As the title says, these are in rare form NEW! Only taken out of the OEM boxes for pics NOT refurbished. Finding RS's new is pretty rare... and below market value ;) PM offers or questions.

BBS 025 16" x 9", 120.65 x 5, et 36

$1800.00 + s/h... obo















H&R 15mm spacers are also for sale to reduce the et.

[Luke!]

amazing! GLWS!!!

[Tonys18t]

wow, great find!

[ck_taft325is]

amazing! GLWS!!!

Coming from this man, that's a serious compliment. Also, I concur.

[Luke!]

Coming from this man, that's a serious compliment. Also, I concur.

hehe :p

I know a lot of Corvette fitment RS025's floating around (even more expensive than OP's btw)

but a brand new set in boxes with papers???

absolutely rare!

priced very good aswell!

[e30Rob]

Holy flippin shit

[dinanm3atl]

Wow. Those should be hung on a wall or something...

[two240s]

got a set of rs025 I'm in the middle of refinishing right now...oops the secrets out.


bump for some brand new RS's:)

[///schwartzman]

Thanks guys... Takes minor mods but less than $100 to get going on a five lug setup. For 4x100 just get adapters ;)

[///schwartzman]

I'm pretty sure 4x100 bolt pattern can be professionally drilled... PM offers. :up:

[///schwartzman]

$1600??

[White325is]

I'm pretty sure 4x100 bolt pattern can be professionally drilled... PM offers. :up:

Nope, The center bore is to big on these. So 4x100 redrill would'nt work.
To make these work with adapters and be flush in the rear you would need a 25mm adapter. 195/40 tire. 195/45 if you wanna roll your fenders like crazy. The fronts would need a 25mm, I think a 20mm you would still hit the stut housing?? If you have camber plates you can adjust them in so the front wheels are even with the fender to match the rear.

Im not 100% sure on what I just posted. But I think Im close.
I went though this befor with mine. But I was fitting 10's. lol
Good luck with sale.

[einstein57]

Great price. Trade for an 01 SV650?

[Hisdudeness300]

wow, GLWS

[///schwartzman]

Nope, The center bore is to big on these. So 4x100 redrill would'nt work.
To make these work with adapters and be flush in the rear you would need a 25mm adapter. 195/40 tire. 195/45 if you wanna roll your fenders like crazy. The fronts would need a 25mm, I think a 20mm you would still hit the stut housing?? If you have camber plates you can adjust them in so the front wheels are even with the fender to match the rear.

Im not 100% sure on what I just posted. But I think Im close.
I went though this befor with mine. But I was fitting 10's. lol
Good luck with sale.

OK then let us dispel fact from fiction...

In my due diligence I've found that the offset depends on what width rim you want, the following is a good guide:

6" rim width: 35mm offset
6½" rim width: 30mm offset
7" rim width: 25mm offset
8" rim width: 15mm offset and so on...

the stud pattern is 4x100 and the centerbore is 57.1mm, which would make these rims a challenge for a standard e30 4x100 setup. This is closer to a e36 setup.