FS: SSR Competitions 17x8 e36 fitment (I run a 12mm spacer)

[Van Westervelt]

Going back to school and tightening my belt, so less wheels and toys. These two sets are 100% straight and true with no curbing etc. There is one nick on one Breyton wheel from a previous owner. Both sets being sold without tires and shipping is extra.

Wheels would be a direct for those running e36 5 lug, adapters, or proper 5 lug with whatever spacer you desire.

I ran them on e30 m3 5 lug with rotor spacers and e36 m3 front brakes. (12.5mm spacer)

SSR Competition - 17x8 et39 $1200 + shipping

Breyton Magic - 17x8.5 et38 & 11x9.5 et15 $old

[Gear_Head13]

How much do the ssr weigh?

[Van Westervelt]

17 lbs if I recall correctly. Might be less though.

[e30_325es]

What size tires are on those just for curiousity?

[Van Westervelt]

215/40-17s on all, except 235/40's on the SSR rears.

[Wh33lhop]

17 lbs if I recall correctly. Might be less though.

That sounds a bit high for 17" comps. I'd think 17x8s are about 15lbs flat.

Edit: quick google says 13.8lbs

[Van Westervelt]

That sounds a bit high for 17" comps. I'd think 17x8s are about 15lbs flat.

I agree, in fact I think they were actually just shy of that at like 14 lb 10 oz. But its been a long time since I didnt have rubber on them. Still mounted, unless they sell.

[Jand3rson]

GOD DAMMIT I want those Breytons...

[Wh33lhop]

Really? I'd take the comps in a heartbeat over the breytons... then again I hate unsprung rotational mass.

[Gear_Head13]

Just curious but what front brakes are you running in the pix with the ssr?

[Gear_Head13]

My bad I should learn how to read before I post

[Van Westervelt]

:) E36 M3 brakes. These are both e36 m3 fitment sets.

[Van Westervelt]

Breytons are getting split up this weekend unless someone snags them stat. Perfect for adapters. Bump Bump.

[Van Westervelt]

Bump. Breytons are now staggered with a 9.5 rear at ET19. Perfect for e30 m3 susp with big brakes, or any e34 etc.

[Ryan...]

god I want those SSRs.......