Up for sale is my 86 Bmw 325. I just recently got the car but I need to get into something fast that just came up therefore me selling this :( Car just got repainted white recently and is very clean. The inside was redone black. Black leathers mint with no rips! New parts within past 20 miles literally.
Chassis - (less then literally 5 miles on everything if that)
- new control arms, bushings, ball joints
- new inner/outter tie rod ends
- new sway bar end links
- rebuilt steering rack
Suspension -
- new cosmo racing coilovers w/corado front bilsteins and koni rear shocks
I- new strut mounts ( all 4 corners )
- rear strut reinforcement plates
Brakes - New calipers ( all 4 corners )
- hawk hp pads ( all 4 corners)
- new brake lines
- new brake hoses
- brembo rotors ( solid )
Transmission - redline fluid
- resurfaced flywheel
- clutchnet clutch/pressure plate ( good for 600whp )
- slave cylinder
- 3.73 lsd ( redline fluid )
interior - all redone to black
- re carpeted black ( OK job )
- seats perfect
Motor/Parts -
- .120 MLS headgasket
- metric blue head bolts
- Water Pump
- Timing belt kit
- 8mm bav auto wires
- etc... etc... etc....
also has H&R 15mm spacers with extended lugs.
Car had a slight very slight gas tank leak so I just ordered a new one as Im waiting for it to come in. Also had a slight rear pinion seal leak and I also just bought a new one and it just came in. Other then that the exhaust has a slight leak which I actually dont mind it gives it that old rustic look/sound I think. The car will need to be aligned. I have a appt to get the tank installed, rear pinion seal, exhaust fixed and alignment all this week. I really want to get a move on this though so maybe we can work out something where I just give you all the parts and you can do it for a cheaper cost. The trunk also has a bunch of spare gaskets and such. The car will also need to front marker lights and a new shift boot. Also comes with a turbo mani that came with the car!
I paid 4500 for this a few weeks ago and I put about 500 into it. Make me a reasonable offer and hopefully we can work something out! thanks
Chassis - (less then literally 5 miles on everything if that)
- new control arms, bushings, ball joints
- new inner/outter tie rod ends
- new sway bar end links
- rebuilt steering rack
Suspension -
- new cosmo racing coilovers w/corado front bilsteins and koni rear shocks
I- new strut mounts ( all 4 corners )
- rear strut reinforcement plates
Brakes - New calipers ( all 4 corners )
- hawk hp pads ( all 4 corners)
- new brake lines
- new brake hoses
- brembo rotors ( solid )
Transmission - redline fluid
- resurfaced flywheel
- clutchnet clutch/pressure plate ( good for 600whp )
- slave cylinder
- 3.73 lsd ( redline fluid )
interior - all redone to black
- re carpeted black ( OK job )
- seats perfect
Motor/Parts -
- .120 MLS headgasket
- metric blue head bolts
- Water Pump
- Timing belt kit
- 8mm bav auto wires
- etc... etc... etc....
also has H&R 15mm spacers with extended lugs.
Car had a slight very slight gas tank leak so I just ordered a new one as Im waiting for it to come in. Also had a slight rear pinion seal leak and I also just bought a new one and it just came in. Other then that the exhaust has a slight leak which I actually dont mind it gives it that old rustic look/sound I think. The car will need to be aligned. I have a appt to get the tank installed, rear pinion seal, exhaust fixed and alignment all this week. I really want to get a move on this though so maybe we can work out something where I just give you all the parts and you can do it for a cheaper cost. The trunk also has a bunch of spare gaskets and such. The car will also need to front marker lights and a new shift boot. Also comes with a turbo mani that came with the car!
I paid 4500 for this a few weeks ago and I put about 500 into it. Make me a reasonable offer and hopefully we can work something out! thanks
Comment