FS - Brand new custom valved bilsteins

[Pottsalot]

Going a different route with my suspension setup. These are brand new bilstein front shock inserts.... part # f4-p36-0335-h0.

Revalve cost was $75 per shock and they shaped the entire damping curve based on vehicle + passenger weights, makes a big difference in handling and control when spring rates are increased on these cars. These were valved for 440 spring rate and i weight 190lbs.




300 shipped

[Robert]

what are regular bilstiens valved for?

[mbonanni]

I read 350 somewhere.

[Pottsalot]

I believe it is 350 also, I can call bilstein tomorrow to confirm this number

Sent from my personal satellite using stolen Soviet cold war technology

[Pottsalot]

Bump

Sent from my personal satellite using stolen Soviet cold war technology

[Pottsalot]

Will do trades for e30 camber plates

Sent from my personal satellite using stolen Soviet cold war technology

[ethirdy]

440 - is that the H&R race spring rate? If so...quite interested...I have a set of good bilsteins with stock valving I could sell and offset this purchase :)

[AlphaE]

and then maybe ill buy yours stock billies..... and the economy will be fixed

[Pottsalot]

I believe the h&r race springs have a 315lb spring rate up front. They could possibly still work. To get a 440 spring rate,you will have to use coilovers

Sent from my personal satellite using stolen Soviet cold war technology

[Pottsalot]

Bump 250 shipped

Sent from my personal satellite using stolen Soviet cold war technology

[e30gentry]

Are these still around really for the fronts.

[Lee22]

how would these work with a moderate drop on a 91 328is?

[Pottsalot]

Sold

Sent from my personal satellite using stolen Soviet cold war technology