For sale
* M20 adapter t3 turbo manifold with a 35mm waste gate flange. Comes with a set of stock exhaust manifolds allready bolted on. This manifold is DIRECT bolt on for any m20 engine.
* Garrett t3 turbo ( also known as a Super 60 ) Has been rebuilt in the past. has minimal shaft play maybe due to been sitting for a few years.
Specs : A.R. .60/.63. Comes with the internal waste gate along with the flange, inlet pipe from a sr20 garrett t25. The compressor side outlet is OEM for the turbo. This turbo was OEM from a ford thunder bird/ Ford mustang SVO 5speed.
this is not the small .60/.43 turbo from the automatics. This is just about the biggest OEM t3 turbo out there.
Both these paired up would go great on a m20. Should start spooling around 3000 to 3500 rpms depending on set up.
Id like to sell these local due to the fact they are not light and will cost alot for shipping.
PMME and give me an offer. Located in Torrance/Gardena area
Pics shown is what they will come with. I also have a cheap knock off SSBOV for 30 bux with pipe.
Manifold:
Turbo:
One flange bolt needs to be backed out. ( easy )
also have a adjusted AFM, Not sure hows its been adjusted but it pulls much better than a stock un-opened afm that I have. We can test it if you like.
Comes with AFM bracket. $50
all parts listed:
Again PMME and we will work out a price. Im not in any rush to sell these.
* M20 adapter t3 turbo manifold with a 35mm waste gate flange. Comes with a set of stock exhaust manifolds allready bolted on. This manifold is DIRECT bolt on for any m20 engine.
* Garrett t3 turbo ( also known as a Super 60 ) Has been rebuilt in the past. has minimal shaft play maybe due to been sitting for a few years.
Specs : A.R. .60/.63. Comes with the internal waste gate along with the flange, inlet pipe from a sr20 garrett t25. The compressor side outlet is OEM for the turbo. This turbo was OEM from a ford thunder bird/ Ford mustang SVO 5speed.
this is not the small .60/.43 turbo from the automatics. This is just about the biggest OEM t3 turbo out there.
Both these paired up would go great on a m20. Should start spooling around 3000 to 3500 rpms depending on set up.
Id like to sell these local due to the fact they are not light and will cost alot for shipping.
PMME and give me an offer. Located in Torrance/Gardena area
Pics shown is what they will come with. I also have a cheap knock off SSBOV for 30 bux with pipe.
Manifold:
Turbo:
One flange bolt needs to be backed out. ( easy )
also have a adjusted AFM, Not sure hows its been adjusted but it pulls much better than a stock un-opened afm that I have. We can test it if you like.
Comes with AFM bracket. $50
all parts listed:
Again PMME and we will work out a price. Im not in any rush to sell these.
Comment