Hey folks, just finished a batch of position 3 arms(sits the engine 1/2 into the firewall). You will have to bang out the firewall a bit, this is the BEST fitment for the swap. It allows clearance for a radiator with plenty of room.
Made these directly off the engine while it was installed. Redesigned the arms on the passenger side to give more room and be stronger than flat mounted arms. Dropouts were made to lower the arm cross beams down 1.5-2" to retain proper support while allowing clearance for any header design. The drop outs were boxed in. All made from 1/4" cold rolled steel.
Driver side mounts have a half moon cut out for the dip stick, the corners are left with a slight L gap that I fill with a double pass MIG that penetrates to the inside(covered in a single pass inner) These will NEVER bend, twist or break no matter how much power you make with the m30. I have a JIG ready for as many mounts desired, all new mounts made will have their parts cut on a plasma table were the mounts I have on my car and two other members are cut out with a metal blade/chop saw.
220.00 shipped as friends and family 230.00 shipped for business/goods(PayPal fee) in USA. will ship outside for added cost of shipping.
Made these directly off the engine while it was installed. Redesigned the arms on the passenger side to give more room and be stronger than flat mounted arms. Dropouts were made to lower the arm cross beams down 1.5-2" to retain proper support while allowing clearance for any header design. The drop outs were boxed in. All made from 1/4" cold rolled steel.
Driver side mounts have a half moon cut out for the dip stick, the corners are left with a slight L gap that I fill with a double pass MIG that penetrates to the inside(covered in a single pass inner) These will NEVER bend, twist or break no matter how much power you make with the m30. I have a JIG ready for as many mounts desired, all new mounts made will have their parts cut on a plasma table were the mounts I have on my car and two other members are cut out with a metal blade/chop saw.
220.00 shipped as friends and family 230.00 shipped for business/goods(PayPal fee) in USA. will ship outside for added cost of shipping.
Attached Files
Comment