My baby is for sale! Moving abroad, so the racecar has got to go to a new home. She's a great race car - runs great and incredibly fun! Asking $7500
The good:
Race prepped e30! Everybody loves a race car!
Recent engine swap with a used engine from Bavarian Engine Exchange - runs GREAT (http://www.bavengine.com/)
Momo steering wheel
OMP driver seat
Sparco passenger seat
VAC seat mounts
Race shocks/struts/springs
Camber kit (Front and rear)
Roll caged (by TC Design)
Exhaust - spec e30 straight pipes (Installed by TC Design)
Short shifter from a z3
Tow hook and strap
Custom MPG gauge (converted to Fun Per Gallon)
Kosei K1 wheels, tires still in good shape, PFC brake pads
Paint's in good shape
Comes with some spare belts, spare wiring, spare new front rotors, and the good ol' Bentley repair manual
Minor issues:
Paint on the roll cage is not perfect, has a few scratches on it
Drips a little oil, but not much at all (I just top off the engine before or after every track day)
The O2 sensor pops out sometimes (I was going to JB Weld it, but I'm going to hold off in case whoever would like to buy the car wants to do a more elegant solution)
Needs an alignment
What needs to be done to pass e30 spec:
Lacks the necessary stickers for spec e30
Interior panels need to be fabricated to cover up wiring
Optional - power window delete
More pictures here - http://imgur.com/a/zSkRE
The good:
Race prepped e30! Everybody loves a race car!
Recent engine swap with a used engine from Bavarian Engine Exchange - runs GREAT (http://www.bavengine.com/)
Momo steering wheel
OMP driver seat
Sparco passenger seat
VAC seat mounts
Race shocks/struts/springs
Camber kit (Front and rear)
Roll caged (by TC Design)
Exhaust - spec e30 straight pipes (Installed by TC Design)
Short shifter from a z3
Tow hook and strap
Custom MPG gauge (converted to Fun Per Gallon)
Kosei K1 wheels, tires still in good shape, PFC brake pads
Paint's in good shape
Comes with some spare belts, spare wiring, spare new front rotors, and the good ol' Bentley repair manual
Minor issues:
Paint on the roll cage is not perfect, has a few scratches on it
Drips a little oil, but not much at all (I just top off the engine before or after every track day)
The O2 sensor pops out sometimes (I was going to JB Weld it, but I'm going to hold off in case whoever would like to buy the car wants to do a more elegant solution)
Needs an alignment
What needs to be done to pass e30 spec:
Lacks the necessary stickers for spec e30
Interior panels need to be fabricated to cover up wiring
Optional - power window delete
More pictures here - http://imgur.com/a/zSkRE
Comment