I had this thread a while back and would like to bring it back from the dead. I finally got around to taking both motors apart so all parts are ready to go. I now have pics of some of the parts. I also lowered some prices.
I am parting out two s50's and a bunch of other stuff:
s50 3.0L Crank (2) - $325 each (one pictures below
s50 Pistons/Rods (set pictures below - one piston slightly scored) - SOLD
s50 Pistons/Rods (nicer set - removing them next weeked) - SOLD
s50 block (damaged water jackets in the rear) - $50
s50 block (no known issues) - $150
s50 head w/ springs and valves (has some clogged water jackets) - $50
s50 head w/ springs and valves (water jackets fine, would need to be decked) - SOLD
s50 Valve Cover (dirty but functional) - $80
s50 US Exhaust Manifolds (front and rear) - $70
s52 Exhaust Manifolds (front and rear) - $80
s50 Timing Case cover - $40
s50 oil pump w/ welded nut - $35
s50 oil pump w/o welded nut - $35
s50 oil filter housing with belt tensioner attached - $40
s52 OBD2 Harness - $200 w/ intake manifold and starter (pictures below) - TB included - intake boot is torn
e36/M3 AC Compressor - $35
s50 Flywheel and Pressure plate - $100 - needs resurfacing
s52 Flywheel and Pressure plate - $100 - needs resurfacing
Also:
e36 Motor Mount arms - $40/set
e36 Dashboard - $100
e36 Speaker Deck - $30
1997 328is Cosmos trunk lid with carpet and tool kit - $125
1997 328is Cosmos doors (both) with regulator (no cards) - $300/set
e36 m3 oil pans - $80/each (I think I have 4)
I have so much more than this too. Let me know if you are looking for something that's not listed. All parts are OBO and priced as picked up in Central NJ. I can ship a lot of these items at an additional cost.
PM me for pictures of anything that's not listed below
s50 crank:
s50 timing case cover:
s50 oil pump:
s50 oil filter housing:
S50 Flywheel and Pressure plate set
I am parting out two s50's and a bunch of other stuff:
s50 3.0L Crank (2) - $325 each (one pictures below
s50 Pistons/Rods (set pictures below - one piston slightly scored) - SOLD
s50 Pistons/Rods (nicer set - removing them next weeked) - SOLD
s50 block (damaged water jackets in the rear) - $50
s50 block (no known issues) - $150
s50 head w/ springs and valves (has some clogged water jackets) - $50
s50 head w/ springs and valves (water jackets fine, would need to be decked) - SOLD
s50 Valve Cover (dirty but functional) - $80
s50 US Exhaust Manifolds (front and rear) - $70
s52 Exhaust Manifolds (front and rear) - $80
s50 Timing Case cover - $40
s50 oil pump w/ welded nut - $35
s50 oil pump w/o welded nut - $35
s50 oil filter housing with belt tensioner attached - $40
s52 OBD2 Harness - $200 w/ intake manifold and starter (pictures below) - TB included - intake boot is torn
e36/M3 AC Compressor - $35
s50 Flywheel and Pressure plate - $100 - needs resurfacing
s52 Flywheel and Pressure plate - $100 - needs resurfacing
Also:
e36 Motor Mount arms - $40/set
e36 Dashboard - $100
e36 Speaker Deck - $30
1997 328is Cosmos trunk lid with carpet and tool kit - $125
1997 328is Cosmos doors (both) with regulator (no cards) - $300/set
e36 m3 oil pans - $80/each (I think I have 4)
I have so much more than this too. Let me know if you are looking for something that's not listed. All parts are OBO and priced as picked up in Central NJ. I can ship a lot of these items at an additional cost.
PM me for pictures of anything that's not listed below
s50 crank:
s50 timing case cover:
s50 oil pump:
s50 oil filter housing:
S50 Flywheel and Pressure plate set
Comment