MA: Subframes/Control arms/Axles/Random

[cm0180]

Hi all

Have some random parts taking up space in my basement - take them away!

First up - 2 subframes, one is very clean, one has surface rust but is very solid. Comes with giant lag bolts I had to use to pull it! $75 for the nicer one, $50 for the less nice one




2 sets of control arms, set 1 has an axle stuck in the driver's side ( don't have an impact and the nut is on it still) but no brakes, set 2 has ATE calipers and stainless lines, plus e-brake cables (no e-brake hardware). $100 per set, hubs included with both.



3 loose axles. One has tone ring for ABS, 2 are non-ABS. Boots are good but I'd repack them before use. Splines are all nice and clean. $25 PER AXLE


Hood insulation set. 3 pieces, new OEM, fits 4 cylinder e30s according to Pelican. ~$40 from Pelican, $20 from me.




Crusty open diff. From an '84 318i, so it's probably a 3.64, but the tag is unreadable. Weld it up and go drifting or something. $25


I also have a complete but disassembled m10 from an early e30, a trans for the same car, some NOS pistons, other bits and pieces.... more to come as I dig stuff out and take pictures.

Here's a link to the album if the pics don't work

http://s1114.photobucket.com/user/cm0180/library/e30

I'm located in Billerica MA, local pickup only please

Thanks!

Collin

[mrfeel1933]

Interested in the good subfame and he good control arms.
Where in mass are you ?
PM ME
I CAN TAKE A DRIVE.

[cm0180]

Hood insulation is sold!

[exc3718]

PM'ed you

[steveracer13]

Any chance you're available tomorrow 4/3? Interested in the diff and the CV shaft with abs.

Sent from my XT1254 using Tapatalk

[brakelate]

Axles

Need one drivers side axle for a late model 6 cylinder.

Can't have any measurable play in the CVs

Email me if yiu can.

Redlyne22@hotmail.com

Thanks
Sina

[pipeuy]

Sent you a pm.