I designed and made some custom heat shields to replace the rusted, busted OEM pieces that normally go around the exhaust manifold and wastegate. These are made from 0.075" (14 gauge/1.9mm) 304 stainless steel, laser cut and stud welded. They will not only outlast the OEM pieces, they'll outlast the human race. They also cover the front of the manifold on the sides as well as the top, adding some extra heat protection vs the OEM design.
I have 2 perfect sets with the protective plastic still on them, and one set that has some scratches on it. $75 for a perfect set, $50 for the scratched set. Add $20 for shipping.
Note: you'll likely need to do some trimming depending on your installation, so plan on having a Dremel or files to make some small adjustments for fitment.
I have 2 perfect sets with the protective plastic still on them, and one set that has some scratches on it. $75 for a perfect set, $50 for the scratched set. Add $20 for shipping.
Note: you'll likely need to do some trimming depending on your installation, so plan on having a Dremel or files to make some small adjustments for fitment.