FS Lots of Misc parts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mattdk318i
    No R3VLimiter
    • Jun 2006
    • 3953

    #1

    FS Lots of Misc parts

    Hey guys, Ive had alot of this stuff laying around my house and now that i need some spare cash im selling what i can of it. I know alot of this stuff is stock but its all in decent condition. Almost all of this came off of my 90 cabbie with 102K. Im upgrading the car so i dont need any of the suspension or rear cv's.
    I took a picture of the rear just to give you an idea. ANY reasonable offer will be seriously considered on these parts. Tell me what you need out of the rear because i havent torn it down yet(minus diff). I will do my best to give you an accurate description of the part and what condition it is in.
    Im on the east coast so i realize alot of these parts are too expensive to ship seeing as how they are used.

    75$ for both plus shipping. The drivers side is missing a dust cap. i took it off and now cant find it.

    only rust on the hubs

    This head was the victim of a bad head gasket. Rockers are corroded as well as the bolts. Perfect candidate for a core or something to send to the machine shop. Give me an offer on this. I dont know what its worth like it is.



    pretty clean manifolds and some of the exaust pipe. 35$ plus shipping for manifolds pipe comes with.

    Intake with rail,injectors,and wiring. 80 plus shipping. Injectors look decent.

    alternator from a 1991 M42 1.8 Will fit 318 or 318is 30$ shipped

    Both lower control arms with good bushings. One of the boots is cracked. Happened when i was removing them. Both for 50$ shipped


    This is the rack that i havent removed. They are 649$ new and this thing is Damn near perfect. ill take 200$ plus shipping


    hood brackets and what not. Not bent. Ill take 5$ shipped.

    For a coupe 5$ plus shipping

    Fog light bult and misc parts. 5$ shipped

    Cruise motor. Got it off ebay. Guy didnt tell me the wire was cut. It can be spliced. Its very clean, 20$ shipped

    Vickers PSP 25$ shipped. I will clean it up and remove brackets before shipping.


    I removed the wheels in the driveway. So the rotors rusted. Not like they are worth anything anyway. Just showing that the car is free of underbody rust. For those that want the rear arms or cv's.

    Im a new guy here on R3V so take it easy on me. If you think i overpriced something let me know dont be an ass. If you arent interested then find another thread to polute.
    Other than that. Thanks for the look guys and i hope you find something on here worth buying.
    All will be paid via paypal only mattdk387@hotmail.com

    Matt

    More pics of the intake........




    The injectors look clean overall, The intake tubes have carbon build up but thats to be expected.
    its kind of dirty becuase its been sitting in my shop for months
    Last edited by mattdk318i; 07-05-2006, 09:16 PM.
    sigpic
  • mcgrath
    E30 Addict
    • May 2004
    • 445

    #2
    pm sent.

    Comment

    • Q5Quint
      Mod Crazy
      • Jan 2005
      • 725

      #3
      pm sent for manifolds

      Comment

      • mattdk318i
        No R3VLimiter
        • Jun 2006
        • 3953

        #4
        bump. Whats this POS head worth? besides a boat anchor
        sigpic

        Comment

        • mattdk318i
          No R3VLimiter
          • Jun 2006
          • 3953

          #5
          more pics of manifold
          sigpic

          Comment

          • bobross
            Mod Crazy
            • Jul 2005
            • 753

            #6
            Got any front 325i Calipers?
            -Greg
            90 325isT - 12.2 @ 120ish - Dyno Results
            b18c5 EG Coupέ - 13.5 @ 100ish - Dyno Results

            Comment

            • mattdk318i
              No R3VLimiter
              • Jun 2006
              • 3953

              #7
              yes i do 50$ for both?
              sigpic

              Comment

              • mattdk318i
                No R3VLimiter
                • Jun 2006
                • 3953

                #8
                exaust manifolds sold
                sigpic

                Comment

                • mattdk318i
                  No R3VLimiter
                  • Jun 2006
                  • 3953

                  #9
                  bump. give me an offer on any of it.
                  sigpic

                  Comment

                  • MA325is88
                    E30 Addict
                    • Mar 2005
                    • 580

                    #10
                    pm sent

                    Comment

                    • mattdk318i
                      No R3VLimiter
                      • Jun 2006
                      • 3953

                      #11
                      i took that rack out and cleaned it. Like i said its only got 102K on it.
                      200 plus shipping OBO. I checked over the boots and they arent ripped or cracked. The tie rod ends will probably be replaced when you install it.





                      Thanks

                      Matt
                      sigpic

                      Comment

                      • mattdk318i
                        No R3VLimiter
                        • Jun 2006
                        • 3953

                        #12
                        if anyone wants something im going to UPS in an hour. I could have it out by today.

                        Matt
                        sigpic

                        Comment

                        • mattdk318i
                          No R3VLimiter
                          • Jun 2006
                          • 3953

                          #13
                          Control arms and manifolds sold.
                          sigpic

                          Comment

                          • mattdk318i
                            No R3VLimiter
                            • Jun 2006
                            • 3953

                            #14
                            i Cleaned the head. Not as bad as i thought it was. Mostly just water and oil residue.
                            im now asking 50$ plus shipping




                            I also took the calipers off the car. They are now for sale. 50$ for both shipped.

                            sigpic

                            Comment

                            • bobross
                              Mod Crazy
                              • Jul 2005
                              • 753

                              #15
                              I'll take the calipers
                              PM me your paypal addy
                              -Greg
                              90 325isT - 12.2 @ 120ish - Dyno Results
                              b18c5 EG Coupέ - 13.5 @ 100ish - Dyno Results

                              Comment

                              Working...