Announcement

Collapse
No announcement yet.

Red label 413 DME ECU for OBDII to OBDI Conversion With AA Chip

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Red label 413 DME ECU for OBDII to OBDI Conversion With AA Chip

    This is a complete Red label 413 DME with Active Autowerkes OBDII to OBDI Chip for an S52 with Stock cams Euro HFM ( or a 540), CAI, Stock injectors for a car with EWS. If you have a M50 and would like to run an S52 this is the DME you need. If you have an M3 and you are upgrading to an S52 this is the ECU you will need. If you have an M3 with an S52 and you are running an OBDI setup than this is the setup you will need. Any application involving an S52 with OBDI system this ECU and Chip combo is great.

    Combo assembled and good to go $400 or best offer.
    The chip is expensive by itself.
    Attached Files
    1989 332IS -S-Fiddy Four-Some weight removed.
    5 lug E36 M3 Brakes Coilovers and LTW's and No ABS.

    #2
    Bump debump
    1989 332IS -S-Fiddy Four-Some weight removed.
    5 lug E36 M3 Brakes Coilovers and LTW's and No ABS.

    Comment


      #3
      Is the EWS disableable (sp?) ?

      Comment


        #4
        I confirmed with AA that this chip will work in car that needs to see an EWS signal as well as a car that does not care if it sees an EWS signal. So technicly the EWS will continue to tell the none existent BCM or existent BCM that "this is the ECU that you are looking for"(Jedi Mind Trick Refrence).

        So in short you dont have to worry about the EWS if you dont have it and if you do this ECU/chip will make it happy.
        1989 332IS -S-Fiddy Four-Some weight removed.
        5 lug E36 M3 Brakes Coilovers and LTW's and No ABS.

        Comment

        Working...
        X