Parting my 2.7i Track Car and Misc Parts

[modifiede30]

I'll try to post some pics of this stuff soon. Some of these parts are installed and may take time to remove but I'll get to it - just let me know if its urgent.


IE Stainless Steel Headers - not yet fixed - mid length - unequal $250.00 - SOLD
Reconditioned 'is' head, new guides, valves, seating job $750.00 - PENDING
New 288 CatCam $275.00 - SOLD
New 292 CatCam $275.00 - PENDING
New CatCam Perf Valve Springs $125.00 - PENDING
New Coilover Springs - 550lb/600lb $250.00 - PENDING
2.7i bottom end - rebuilt with balancing and machining – 27k miles - $300.00 - PENDING
GC Coilovers - standard spring rates 27k miles $200.00 - SOLD
Koni Adjustable Sport Shocks 27k miles $200.00 - BLOWN (EXCEPT 1)
TD Wheels - Pro Race 1 new in box - black $525.00 - SOLD
Konig Wheels - Imagine in bronze diy powder coat $350.00
Stock Basketweaves $150.00
Corbeau Seats - Forza - (local pick-up only) $325.00 set
Corbeau Bases $50.00 each
Rear Subframe cleaned and painted with camber adjustment tabs installed $300.00 – subframe bushings have been removed.
Kirk 4-Pt Bar $250.00 - SOLD
2.5l Block $50.00
ETA Crank $50.00 - SOLD
Bored TB $100.00
ECU Chip - Alpina Copy $150.00
ECU Chip - Stock $25.00
ECU Chip - ETA Modified for 027 stroked engine $150.00
ETA Tranny $150.00
is Tranny $200.00
RX7 Calipers $25.00 - SOLD
IE Camber Plates - 2.5" $175.00 - SOLD
Delrin CA's $50.00 - SOLD
Lightened stock IS flywheel 10lb - $200.00
MSDS Headers $100.00 - PENDING SALE
7mm wires $75.00
19# injectors (8) $50.00
New but installed 22mm ST Front Bar $100.00 - SOLD
New uninstalled 22mm IE Front Bar $150.00 - SOLD
25mm Master Cylinder $75.00 - SOLD

NEW ITEMS - BEST OFFERS TAKEN

Fog Lights - SOLD
Light buckets for stock e30 - PENDING
Grills around lights
Center kidney's - SOLD
Alternator
Radiator
Oil Cooler
Visors - SOLD
'is' mirrors
dash - 1-2 small cracks in the tray section and near windsheild
ABS unit
Stock 'is' sway bar
'is' intakes (I have 3, one ported)
Fuel rail
'is' wiring harness
ecu '173'
starter
manual sunroof crank
stock jack
'is' fog lights (need new bulbs) - SOLD
drivers-side bolster
gauge trim
center vent gauge panel - SOLD

pics:

Seats

http://www.flyingbrickperformance.com/Business_Docs/seat1.jpg

http://www.flyingbrickperformance.com/Business_Docs/seat2.jpg

MSDS Headers

http://www.flyingbrickperformance.com/Business_Docs/headers.jpg

Konig wheels

http://www.flyingbrickperformance.com/Business_Docs/konig_wheel.jpg

TD wheels

http://www.flyingbrickperformance.com/Business_Docs/TD_wheel.jpg

Roll bar

http://www.flyingbrickperformance.com/Business_Docs/roll_bar.jpg

Stainless Headers

http://www.flyingbrickperformance.com/Business_Docs/ss_headers.jpg

Subframe with adjustable camber tabs

http://www.flyingbrickperformance.com/Business_Docs/subframe.jpg

More Pics

Delrin CA Bushings

http://www.flyingbrickperformance.com/Business_Docs/delrin_cas.jpg

Head Pics

http://www.flyingbrickperformance.com/Business_Docs/head-intern.jpg

http://www.flyingbrickperformance.com/Business_Docs/head-out.jpg

IE Plates

http://www.flyingbrickperformance.com/Business_Docs/ie_plates.jpg

Wires

http://www.flyingbrickperformance.com/Business_Docs/strut-brace-wires.jpg

Throttle Body

http://www.flyingbrickperformance.com/Business_Docs/tb.jpg

GC's

http://www.flyingbrickperformance.com/Business_Docs/gcs.jpg

Weaves

http://www.flyingbrickperformance.com/Business_Docs/wheel1.jpg

http://www.flyingbrickperformance.com/Business_Docs/wheel2.jpg

[Lof8]

I'd like to take the kirk roll bar off your hands. any pics?
thanks, Andy
also interested in the ST front bar- does it include all mounting hardware etc? pics?

[modifiede30]

I'd like to take the kirk roll bar off your hands. any pics?
thanks, Andy
also interested in the ST front bar- does it include all mounting hardware etc? pics?

I can probably get you pics this weekend. The ST bar doesn't have hardware but I can get this to you for about $35 - just need to get an order filled first.

[MR 325]

Can you send me pics of the following?

is Tranny $200.00
Lightened stock IS flywheel 10lb - $200.00
MSDS Headers $100.00

Also, how many miles on these parts? And, what would shipping be to 91214?

Thanks.

[einstein57]

interested in crank, chip, and injectors shipped to 90035. What ecu is the chip for?

[03IRM3]

What are the specs on these - might be interested:

TD Wheels - Pro Race 1 new in box - black $525.00

[modifiede30]

These are all installed in the driveline so it'll take me a bit to get them out and photos done. I'll see if I can start to pull things this weekend from the driveline.

Can you send me pics of the following?

is Tranny $200.00
Lightened stock IS flywheel 10lb - $200.00
MSDS Headers $100.00

Also, how many miles on these parts? And, what would shipping be to 91214?

Thanks.

[modifiede30]

interested in crank, chip, and injectors shipped to 90035. What ecu is the chip for?

Chip - which one?

Its the 027 ecu version.

[modifiede30]

What are the specs on these - might be interested:

TD Wheels - Pro Race 1 new in box - black $525.00

15x7, 4x100 bolt. 13.1lb.

[KenC]

dibs on the Konis. what is your paypal?

Also, what is the advantage of the RX7 calipers?

[modifiede30]

dibs on the Konis. what is your paypal?

Also, what is the advantage of the RX7 calipers?

You may be too late on the Konis - will let you know since they pm'd me first. The rx7 calipers are miscellaneous stuff probably better for a different forum.

[rhett325i]

specs on 2.7i block? Also is this 27k track only miles?
condition of 2.5 block?
how much shipping to Oregon 97035 for either?

[modifiede30]

specs on 2.7i block? Also is this 27k track only miles?
condition of 2.5 block?
how much shipping to Oregon 97035 for either?

2.7i block started as a seta, rehoned, cleaned, etc. 27K is mainly daily driving miles, but it does have a few track days from DE's. 2.5 block is decent as well from a recent rebuild but the head gave up during a track event. On the 2.7, do you want the internals, or just the block?

[KenC]

You may be too late on the Konis - will let you know since they pm'd me first. The rx7 calipers are miscellaneous stuff probably better for a different forum.

I'll offer more $ for the Konis :)

Are they all top adjustable?

[modifiede30]

I'll offer more $ for the Konis :)

Are they all top adjustable?

Front are top, rear are bottom.