the chassis is a 1988 325is in lachsilver metallic.
the paint is not to great but still very presentable.
has some minor rust, mostly the part in the rear valance under the battery. its been sealed to prevent anymore damage.
both floor pans had rust, but it was cut out and sealed with silicon and riveted steel plate.
two more spots exist on the pass side under the exhaust shielding. will be addressed as well.
it has been modified to accept an m30 swap.
the chassis comes with:
** i have a non refundable deposit placed on a 6pt rollcage for this car. you only need to pay 250 cash upon pickup to get the cage if you desire it** its yoshi's old autopower 6pt.
Interior pic (no rear seat or woodgrain anymore)
black leather door cards
crack free dash
re-worked cluster via guten parts (cluster rings, orange needles, and tach strip)
custom akg dtm style shifter
pass side black leather/suede sport seat
bc racing coilovers at 10k/12k. (have about 3 months of use on them, but during a stint in the rain i put the car in a ditch and got the rear pass side strut scratched. its not on the threads or the actual shock body, but instead on the receiving section of the coilover)
massivelee aux caliper bracket
diamond racing steelies 15x8 et0 (will need two front tires soon)
nardi steering hub
S3.73 lsd
akg racing 75D bushings in:
motor mount
trans mount
cabs
rtabs
subframe
the car is sold with various spare parts and about 13 pairs of tires to kill drifting.
also comes with a pair of IX weaves wrapped in decent 205/55/15 with spacers and lugs.
it made car of the month at akg. i was mid swap when i made the application.
http://www.akgmotorsport.com/carofmonth.php
in action
pics
before the coils
steelie fitment
** all upgrades were done in the last 8K miles, so the parts are near if not new***
i can include a tan drivers seat or you can bring your own.
motor option:
m30b34
all new gaskets except the head gasket.
converted to run motronic 1.3
b35 intake maniold and e34 oilpan and pump.
b35 intake manifolds
motor mount arms for the swap
all wiring is done
all sensors are present
has e34 535i flywheel
e34 m30 g260
new slave (needs bleed)
m5 clutch/pp
new pilot bearing
recent TOB
m20 g260 output flange to accept stock driveshaft
i have 2.5 ID pipeing for the exhaust along with a cat, x and y pipe, muffler. all you need is the o2 sensor.
i have 3 lists with the car.
things that need to be done to make the car run
bolts that need to be looked over and torqued down (brakes/suspension)
parts that needs to be purchased/put in (all small things like starter, fluids, spark plugs, dust caps, o2 sensor bung)
i will also provide help with getting it running if so needed.
3000 cash firm takes the car and motor. i can arrange for the car to be finished by a local shop but will come out of your pocket.
the paint is not to great but still very presentable.
has some minor rust, mostly the part in the rear valance under the battery. its been sealed to prevent anymore damage.
both floor pans had rust, but it was cut out and sealed with silicon and riveted steel plate.
two more spots exist on the pass side under the exhaust shielding. will be addressed as well.
it has been modified to accept an m30 swap.
the chassis comes with:
** i have a non refundable deposit placed on a 6pt rollcage for this car. you only need to pay 250 cash upon pickup to get the cage if you desire it** its yoshi's old autopower 6pt.
Interior pic (no rear seat or woodgrain anymore)
black leather door cards
crack free dash
re-worked cluster via guten parts (cluster rings, orange needles, and tach strip)
custom akg dtm style shifter
pass side black leather/suede sport seat
bc racing coilovers at 10k/12k. (have about 3 months of use on them, but during a stint in the rain i put the car in a ditch and got the rear pass side strut scratched. its not on the threads or the actual shock body, but instead on the receiving section of the coilover)
massivelee aux caliper bracket
diamond racing steelies 15x8 et0 (will need two front tires soon)
nardi steering hub
S3.73 lsd
akg racing 75D bushings in:
motor mount
trans mount
cabs
rtabs
subframe
the car is sold with various spare parts and about 13 pairs of tires to kill drifting.
also comes with a pair of IX weaves wrapped in decent 205/55/15 with spacers and lugs.
it made car of the month at akg. i was mid swap when i made the application.
http://www.akgmotorsport.com/carofmonth.php
in action
pics
before the coils
steelie fitment
** all upgrades were done in the last 8K miles, so the parts are near if not new***
i can include a tan drivers seat or you can bring your own.
motor option:
m30b34
all new gaskets except the head gasket.
converted to run motronic 1.3
b35 intake maniold and e34 oilpan and pump.
b35 intake manifolds
motor mount arms for the swap
all wiring is done
all sensors are present
has e34 535i flywheel
e34 m30 g260
new slave (needs bleed)
m5 clutch/pp
new pilot bearing
recent TOB
m20 g260 output flange to accept stock driveshaft
i have 2.5 ID pipeing for the exhaust along with a cat, x and y pipe, muffler. all you need is the o2 sensor.
i have 3 lists with the car.
things that need to be done to make the car run
bolts that need to be looked over and torqued down (brakes/suspension)
parts that needs to be purchased/put in (all small things like starter, fluids, spark plugs, dust caps, o2 sensor bung)
i will also provide help with getting it running if so needed.
3000 cash firm takes the car and motor. i can arrange for the car to be finished by a local shop but will come out of your pocket.
Comment