FS: e30 euro bumpers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • grey ghost
    Mod Crazy
    • Jun 2009
    • 612

    #1

    FS: e30 euro bumpers

    I have a nice set of euro bumpers.
    They are not perfect but will compliment your e30 with a little polishing.

    There was some mild surface rust on the inside that would be expected on a 20+ year old part.
    The rust has been sanded, treated with a rust preventer/sealer and sprayed with a brilliant silver.
    The structural integrity is 100% intact.

    The trim has also been touched up and looks very fresh.
    All carriage bolts are brand new.

    Although not pictured, the rear bumper brackets are included.

    The only missing parts are the two pieces that go on the ends of the rear bumper rubber.

    $400 shipped to the lower 48.

    I would like to ship these bumpers as they are, but for $25, I will reassemble them and ship them ready to mount.









    I wanted to add this piece of info I forgot to mention earlier.
    The small pieces that cover the joints between the center and the corners has chrome that is nt as nice as the centers or the corners.
    Although there is definite interest and they may already be sold, I needed to point this out because this may be a deal breaker for some of you, and if so I understand.
    I'm waiting to hear back from buyer #1 to see if he is in or out. Those of you who have shown definite interest, please PM if this is a deal breaker so I don't waste your time and mine sending PMs.

    Although rechroming is not cheap, getting these small pieces done won't break your budget.

    Here's a picture:

    Last edited by grey ghost; 06-27-2009, 02:56 PM.

    88 545is, k27 Turbo, TCD Turbo Chip, 30lbs Injectors, b35 cam, Aftermarket Intercooler, Custom 3" to Dual 2.5" Exhaust, HRs/Sports, BBK, SS Lines, 18" Staggered Alpinas, 235/40-265/35 Falkens, S2.93.
  • thereisnoyun
    R3VLimited
    • Feb 2007
    • 2301

    #2
    wow nice set glws

    Comment

    • M-technik-3
      I waste 90% of my day here and all I got was this stupid title
      • Oct 2003
      • 18946

      #3
      So they have been sanded vs blasted?
      https://www.facebook.com/BentOverRacing

      Comment

      • grey ghost
        Mod Crazy
        • Jun 2009
        • 612

        #4
        Originally posted by M-technik-3
        So they have been sanded vs blasted?
        I used a coarse wire drill bit, then a fine wire bit, then some wet/dry sand paper. It did a great job removing the rust. I though about blasting, but opted to do it myself. I think it’s a comparable job.

        88 545is, k27 Turbo, TCD Turbo Chip, 30lbs Injectors, b35 cam, Aftermarket Intercooler, Custom 3" to Dual 2.5" Exhaust, HRs/Sports, BBK, SS Lines, 18" Staggered Alpinas, 235/40-265/35 Falkens, S2.93.

        Comment

        • Jean
          Moderator
          • Aug 2006
          • 18228

          #5
          Looks like you are also missing the lights for the front bumper, unless they aren't pictured.
          Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



          OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

          Comment

          • grey ghost
            Mod Crazy
            • Jun 2009
            • 612

            #6
            Originally posted by Jean
            Looks like you are also missing the lights for the front bumper, unless they aren't pictured.

            Thanks for the reminder. WOW. I do have them. They are in the garage.

            88 545is, k27 Turbo, TCD Turbo Chip, 30lbs Injectors, b35 cam, Aftermarket Intercooler, Custom 3" to Dual 2.5" Exhaust, HRs/Sports, BBK, SS Lines, 18" Staggered Alpinas, 235/40-265/35 Falkens, S2.93.

            Comment

            • Holland
              R3V OG
              • Nov 2008
              • 7176

              #7
              pm has been sent
              1985 M10b18. 70maybewhpoffury. Over engineered S50b30 murica BBQ swap in progress.

              Originally posted by DEV0 E30
              You'd chugg this butt. I know you would. Ain't gotta' lie to kick it brostantinople.

              Comment

              • bataangpinoy
                E30 Mastermind
                • Jul 2008
                • 1636

                #8
                how would they look on an 88....
                My feedback:
                http://www.r3vlimited.com/board/showthread.php?t=186328

                http://e30tech.com/forum/showthread.php?t=74911

                Instagram:
                @gears_n_glory

                @functionmotorsports

                Comment

                • Japandrew73
                  Banned
                  • Sep 2008
                  • 2164

                  #9
                  Those are in great condition! Especially the trim

                  Comment

                  • Aptyp
                    R3V OG
                    • Feb 2008
                    • 6584

                    #10
                    beautiful and local, but I am broke.

                    Comment

                    • kronus
                      R3V OG
                      • Apr 2008
                      • 13014

                      #11
                      Yeah, that set is pretty awesome. I have half a mind to pick it up and resell mine.
                      cars beep boop

                      Comment

                      • grey ghost
                        Mod Crazy
                        • Jun 2009
                        • 612

                        #12
                        I have another set that I'm about to clean up right now. As in RIGHT now. The chrome is not as nice and there is a little rust on the outside of one of the front corners that is about 95% covered by the front corner trim.

                        Once I clean them up, I'll take pictures and take some close-ups of that front corner.

                        88 545is, k27 Turbo, TCD Turbo Chip, 30lbs Injectors, b35 cam, Aftermarket Intercooler, Custom 3" to Dual 2.5" Exhaust, HRs/Sports, BBK, SS Lines, 18" Staggered Alpinas, 235/40-265/35 Falkens, S2.93.

                        Comment

                        • Holland
                          R3V OG
                          • Nov 2008
                          • 7176

                          #13
                          I'll stick to taking the first set.
                          1985 M10b18. 70maybewhpoffury. Over engineered S50b30 murica BBQ swap in progress.

                          Originally posted by DEV0 E30
                          You'd chugg this butt. I know you would. Ain't gotta' lie to kick it brostantinople.

                          Comment

                          • grey ghost
                            Mod Crazy
                            • Jun 2009
                            • 612

                            #14
                            Bump with new info. please scroll up.

                            Since the chrome on the 2nd set is shot, I was thinking of doing them in black.
                            Once done in black, they will be in very very very good condition. Almost like new.
                            The trim will be done and there will be new carriage bolts all the way around.

                            If there is anyone ready to pull the trigger on a black set let me know.
                            I can refinish them, give them a few days to cure and then wrap and ship.

                            I've refinshed chrome bumpers in the past and they come out great.

                            I would ask for payment first as there may be some interest in the set as they are.

                            The cleaning was to take place today, but it was too hot and indoors was the only place for me.
                            Last edited by grey ghost; 06-27-2009, 03:13 PM.

                            88 545is, k27 Turbo, TCD Turbo Chip, 30lbs Injectors, b35 cam, Aftermarket Intercooler, Custom 3" to Dual 2.5" Exhaust, HRs/Sports, BBK, SS Lines, 18" Staggered Alpinas, 235/40-265/35 Falkens, S2.93.

                            Comment

                            • grey ghost
                              Mod Crazy
                              • Jun 2009
                              • 612

                              #15
                              1st set SOLD.

                              Any interest in a black set?
                              Last edited by grey ghost; 06-29-2009, 04:29 PM.

                              88 545is, k27 Turbo, TCD Turbo Chip, 30lbs Injectors, b35 cam, Aftermarket Intercooler, Custom 3" to Dual 2.5" Exhaust, HRs/Sports, BBK, SS Lines, 18" Staggered Alpinas, 235/40-265/35 Falkens, S2.93.

                              Comment

                              Working...