Seeing if there'd be any interest in my complete set of metal bumpers with an early is valance. Sale is purely dependent on my purchase of euro bumpers.
Included would be:
-Bumpers themselves
-Bumper shocks
-Bumper shrouds (color matched bright ass red to my shitty Maaco respray by PO, would need to be stripped off to not look out of place)
-Sidemarkers in pretty good shape. Trim was resprayed with Duplicolor Trim paint and they all look pretty good.
-Brand new front bumper strips, however no front plate holder or delete.(purchased in August, driven with once. 100% perfect condition)
-Front turn signals, lenses smoked with VHT niteshades.
-Early is valance, in great shape except for the shitty Maaco paint. No cracks or chunks missing, etc. Only problems are the usual scuffs on the bottom. You could clean this up really nicely.
EDIT: Corner of valance has a weird defect, hardly noticeable. Looks like it was near heat or something, see pictures.
-Valance mounted foglights. DS lense cracked badly, and both of the connectors were snipped off. DS is also loose and seems to be missing some mounting hardware. PS foglight has usual pitting but is not cracked and is in acceptable shape.
-Valance rebar+mounts etc. The only issue here is that I do not have the hardware to mount it. Should be an easy fix at the hardware store. The rebar is rusty, but the mounts are completely intact and are not cracked or broken in any way.
The set is fairly clean with the exception of a few things, the foglights as mentioned above, the shitty paint on the shrouds and valance, and the PO must have backed into something at a very low speed(2mph?). The rear bumper is very slightly tweaked because of this, and even a little crushed/cracked by the DS bumper shock. It is very hardly noticeable if you look at it from the top down. I don't think that the shock itself was affected at all by it. When you take the rear bumper strip off it is pretty obvious.
I can grab pictures of the valance+rebar as they're in my garage, but pics of the rest will need to wait.
Would like to sell this complete and not have to pick it apart. I have a rough idea of what the valance goes for, but I'm not really sure about the rest. Since I need a price we can start at $450 and go from there. Throw me an offer, the worst I can say is no. Cash only please, unless you have fairly clean euro bumpers to trade(+ $ on my end) for some reason ;)
Thanks!
Valance
This is the weird bend in the corner of the valance.
Left side.
Right side, the pictures don't really show the crack in the lens, if you look hard towards the top of it you can kinda see it.
Scrapes on the bottom, nothing major.
Rebar/mounts. Rebar is rusty but the mounts are completely intact.
Included would be:
-Bumpers themselves
-Bumper shocks
-Bumper shrouds (color matched bright ass red to my shitty Maaco respray by PO, would need to be stripped off to not look out of place)
-Sidemarkers in pretty good shape. Trim was resprayed with Duplicolor Trim paint and they all look pretty good.
-Brand new front bumper strips, however no front plate holder or delete.(purchased in August, driven with once. 100% perfect condition)
-Front turn signals, lenses smoked with VHT niteshades.
-Early is valance, in great shape except for the shitty Maaco paint. No cracks or chunks missing, etc. Only problems are the usual scuffs on the bottom. You could clean this up really nicely.
EDIT: Corner of valance has a weird defect, hardly noticeable. Looks like it was near heat or something, see pictures.
-Valance mounted foglights. DS lense cracked badly, and both of the connectors were snipped off. DS is also loose and seems to be missing some mounting hardware. PS foglight has usual pitting but is not cracked and is in acceptable shape.
-Valance rebar+mounts etc. The only issue here is that I do not have the hardware to mount it. Should be an easy fix at the hardware store. The rebar is rusty, but the mounts are completely intact and are not cracked or broken in any way.
The set is fairly clean with the exception of a few things, the foglights as mentioned above, the shitty paint on the shrouds and valance, and the PO must have backed into something at a very low speed(2mph?). The rear bumper is very slightly tweaked because of this, and even a little crushed/cracked by the DS bumper shock. It is very hardly noticeable if you look at it from the top down. I don't think that the shock itself was affected at all by it. When you take the rear bumper strip off it is pretty obvious.
I can grab pictures of the valance+rebar as they're in my garage, but pics of the rest will need to wait.
Would like to sell this complete and not have to pick it apart. I have a rough idea of what the valance goes for, but I'm not really sure about the rest. Since I need a price we can start at $450 and go from there. Throw me an offer, the worst I can say is no. Cash only please, unless you have fairly clean euro bumpers to trade(+ $ on my end) for some reason ;)
Thanks!
Valance
This is the weird bend in the corner of the valance.
Left side.
Right side, the pictures don't really show the crack in the lens, if you look hard towards the top of it you can kinda see it.
Scrapes on the bottom, nothing major.
Rebar/mounts. Rebar is rusty but the mounts are completely intact.
Comment