318i, 325, and turbo parts!!! help me clean out my trunk(manifold reduced)

[ogbimmer]

I have a bunch of stuff for sale just let me know what you need
I have a getrag 260 out of my turbo 4door that works perfect with not noises or leaks $300 obo
I have a balanced single mass flywheel
a act 6 puck performance clutch
a Sachs pressure plate that held 300hp easily
I also have a 84 318 trans 100
I have another getrag 260 with a dual mass flywheel and pp and such needs part of the c clamp welded but works fine $125
4:10 open diff $100
Driveshaft from 4 door $100
3" exhaust with magniflow must pick up in greensboro $90 obo
ebachi lowering springs $125 1 set sold
I also have a 2.7 stroker motor with a 2.8 td crank and lots of other goodies for $900 obo less then 1k miles!!
I have a turbo manifold made out of stainless steal that works great $550
hks 40mm wastgate
34lbs injectors=SOLD
t3 t70 turbo just checked the shaft play and its good! $300 obo
I have a fuel pump, alternator, ac condenser, stock injectors motor mounts and some other stuff just ask.
281-454-9245
Oh and I have a candy paint turquoise valve cover I will let go for $150

[david2991]

Eibachs for what e30... I'm looking for lowing springs fitting a 325es. Lemme know.

[mr walker]

Hmm...tentative dibs on the flywheel/clutch/pressure plate. Mileage and condition? Price?

Thanks

[rares]

wow lots of goodies... should sell quick.. GLWS

[ogbimmer]

Eibachs for what e30... I'm looking for lowing springs fitting a 325es. Lemme know.

They came off my 89 325i 4 door
but I also have the same set on a 87e so they should work perfect man. :)

Hmm...tentative dibs on the flywheel/clutch/pressure plate. Mileage and condition? Price?

Thanks

I bought the pp lightly used and drove it twice with the setup which trying to see how the tune was.
The flywheel was balanced and resurfaced before reinstalled.
The pp Is just a stock one I think but it held up fine to a 2.7i turbo with 12psi.
heres a pic so you can see the condition

Nice valve cover!!

Thanks man!!! you should buy it :)

[Jkersh]

ABS Brake Hardline needed... connects to Brake Master Cyl closest to the Brake booster.



I am located down in Charlotte

[cRyan18]

pm'd you, but this answers my question. dibs on the i springs if you still got em.

[mr walker]

I bought the pp lightly used and drove it twice with the setup which trying to see how the tune was.
The flywheel was balanced and resurfaced before reinstalled.
The pp Is just a stock one I think but it held up fine to a 2.7i turbo with 12psi.
heres a pic so you can see the condition

So did you mean the clutch was lightly used and drove it twice...? I guess either way what is the condition of the clutch? Also, do you have a price in mind for all of the above?

Thanks again

[318aye]

hey christian, whats the deal with those oil lines? PM or text me.

[pacmanE30]

How much for the wastegate to 92026?

[ogbimmer]

I bought the pp lightly used and drove it twice with the setup which trying to see how the tune was.
The flywheel was balanced and resurfaced before reinstalled.
The pp Is just a stock one I think but it held up fine to a 2.7i turbo with 12psi.
heres a pic so you can see the condition

So did you mean the clutch was lightly used and drove it twice...? I guess either way what is the condition of the clutch? Also, do you have a price in mind for all of the above?

Thanks again

I mean I was thinking $300 shipped. just pm and let me know what you had in mind :)

[HR2L]

The valve cover is clean! Bump for you sir, great color choice. :)

[ogbimmer]

thanks for the bump! going out in a bit if anyone wants to meet local!

[ogbimmer]

Injectors SOLD
1 set of the springs SOLD.
I will sell the second set of springs for $100 local if you give me your stock springs
I still have the stainless steal manifold! with a 4 bolt wastegate flange(instead of 2) $500 shipped for R3v!
And I know someone needs a clutch! Lets hear some offers

[ogbimmer]

Hmm...tentative dibs on the flywheel/clutch/pressure plate. Mileage and condition? Price?

Thanks

still want the goods?? pm me :)