For anyone doing a Full race car that wants a custom body harness and guages here it is
I have a fiberglass race dash with the following. This dash is Cut for a roll cage and a factory steering column. There are also two brackets that support the dash and bolt directly to the factory dash mount hole's on the car.
- Fiberglass Race dash by www.dtmfiberwerkz.com
- Autometer 5" 10k Tach - Autometer Programmable Fuel Level Guage
- Autometer Water Temp Guage
- Autometer Oil Temp Guage
- Autometer Oil Pressure Guage
- AEM UGEO Wide-band o2 sensor
- AEM TruBoost Electronic Boost Controler
- Two Longacre Cutoff switch's: 1 is located for external cutoff switch and the other is located on the left side of the dash. This switch kill's power to the relay panel.
- RED Bulb located to the left top area of the Tach for the Check Engine light
- Digital Delay Switch Panel (Start Button, Ignition, Fuel, Water Pump, Fan, Head Lights, Tail Lights, Aux1, Aux2)
The Digital Delay switch panel runs the whole car as far as the body harness go's. It has its own Relay board with fuse's and LED's to let you know if something is not working properly.
The Digital delay switch panel is the full body harness of the car. It runs everything, and the only two things i dont have wired up are Hazard lights and wiper blade's, which could be wired to the Aux 1 and Aux two switch's.
Also the body harness is wired up so it can connect Directly to a OBD1 E36 engine harness.
This is the Relay/Fuse panel.
Here is the Dash the Cutoff switch and RED Check engine light are not in the photo but they are there now.The dash also has a textured black paint on it.
Guages left to right
Fuel level, Tack, Water Temp, Wideband o2 Sensor, Boost Controler, Oil Temp, Oil Pressure
Price is $1700.00 & Buyer pays Shipping
I have a fiberglass race dash with the following. This dash is Cut for a roll cage and a factory steering column. There are also two brackets that support the dash and bolt directly to the factory dash mount hole's on the car.
- Fiberglass Race dash by www.dtmfiberwerkz.com
- Autometer 5" 10k Tach - Autometer Programmable Fuel Level Guage
- Autometer Water Temp Guage
- Autometer Oil Temp Guage
- Autometer Oil Pressure Guage
- AEM UGEO Wide-band o2 sensor
- AEM TruBoost Electronic Boost Controler
- Two Longacre Cutoff switch's: 1 is located for external cutoff switch and the other is located on the left side of the dash. This switch kill's power to the relay panel.
- RED Bulb located to the left top area of the Tach for the Check Engine light
- Digital Delay Switch Panel (Start Button, Ignition, Fuel, Water Pump, Fan, Head Lights, Tail Lights, Aux1, Aux2)
The Digital Delay switch panel runs the whole car as far as the body harness go's. It has its own Relay board with fuse's and LED's to let you know if something is not working properly.
The Digital delay switch panel is the full body harness of the car. It runs everything, and the only two things i dont have wired up are Hazard lights and wiper blade's, which could be wired to the Aux 1 and Aux two switch's.
Also the body harness is wired up so it can connect Directly to a OBD1 E36 engine harness.
This is the Relay/Fuse panel.
Here is the Dash the Cutoff switch and RED Check engine light are not in the photo but they are there now.The dash also has a textured black paint on it.
Guages left to right
Fuel level, Tack, Water Temp, Wideband o2 Sensor, Boost Controler, Oil Temp, Oil Pressure
Price is $1700.00 & Buyer pays Shipping
