M20 885 Head, Intercooler, Crank Scraper, Oil Pan

[John@Revshift]

I will ship to anywhere in the USA if you pay for the shipping. All items are located at the Revshift shop in Warren, MI. I can take paypal, a credit card over the phone, or a check/money order in the mail. I am the owner of Revshift and all of the money from these parts is going back to the company. We are a trusted vendor on the forums so there is no need to be skeptical about paying us.

If you are interested in any of these items or if you have questions PM me or call me at 586-510-4042 (Revshift shop) and ask for John.

885 Head:
- new +1 intake valves
- new valve seals
- new valve guides
- welded water jackets
- freshly machined, milled, valve seats
- clean oem cam
- new oem rockers
- new cam seals
- new valve springs
$800

http://www.revshift.com/e30parts/e30head1.jpg

http://www.revshift.com/e30parts/e30head2.jpg

http://www.revshift.com/e30parts/e30head3.jpg

http://www.revshift.com/e30parts/e30head4.jpg

SOLD Intercooler and piping:
- Bar and plate intercooler
- no leaks
- includes two Mode bypass valves
- steel piping, fully welded, no mid couplers.
- included 90 degree coupler and v-band flange for HX35 turbo
- includes intake air temp sensor
- custom made for an E30 with top mount turbo
SOLD $250

http://www.revshift.com/e30parts/e30intercoolerkit1.jpg

http://www.revshift.com/e30parts/e30intercoolerkit2.JPG

http://www.revshift.com/e30parts/e30intercoolerkit3.JPG

http://www.revshift.com/e30parts/e30intercoolerkit4.JPG

SOLD M20 Oil Pan
- turbo oil return fitting installed (welded and coated with JB weld)
- no cracks
- baffles and level sensor included
- oily
SOLD $80

http://www.revshift.com/e30parts/e30oilpan.jpg

(SOLD) M20 Short Block: (SOLD)
- freshly machined block, decked, bored, honed. It has been o-ringed for boost.
- Custom JE pistons, 85mm, forged. They are somewhere in the 8.5-9.0:1 compression range, its built for boost.
- Eagle H-beam S52 rods, forged
- freshly machined oem crank
- new bearings and piston rings
- new freeze plugs
- ARP head studs
- ARP main studs
- ARP rod bolts
- Race ready!
$1,500

http://www.revshift.com/e30parts/e30block1.jpg

http://www.revshift.com/e30parts/e30block2.jpg

http://www.revshift.com/e30parts/e30block3.jpg

http://www.revshift.com/e30parts/e30block4.jpg
http://www.revshift.com/e30parts/e30block5.jpg
http://www.revshift.com/e30parts/e30block6.jpg

(SOLD) Holset HX35W Turbo: (SOLD)
- Customized for an E30
- black ceramic coated exhaust housing
- welded v-band exhaust outlet (will never leak)
- twin scroll T3
This HX35 is in excellent condition. No excessive shaft play. Ceramic coated exhaust housing. Compressor housing is painted black with high temp paint. The exhaust outlet flange was bolted to the turbo and then tig welded all the way around. There is no possible way to have any exhaust leaks with this turbo. The v-band outlet was made to with with the E30 downpipe that I am selling and vice versa.
$450
http://www.revshift.com/e30parts/e30holset1.jpg
http://www.revshift.com/e30parts/e30holset2.JPG
http://www.revshift.com/e30parts/e30holset3.JPG
http://www.revshift.com/e30parts/e30holset4.jpg
http://www.revshift.com/e30parts/e30holset5.jpg
http://www.revshift.com/e30parts/e30holset6.JPG

(SOLD) MegaSquirt-III V3.0 ECU: (SOLD)
- Assembled
- MS3 daughterboard
- MS3X expansion card
- brushed aluminum case mounted to oem E30 bracket
- mess of wiring included
$300
http://www.revshift.com/e30parts/e30ms31.jpg
http://www.revshift.com/e30parts/e30ms32.jpg
http://www.revshift.com/e30parts/e30ms33.jpg
http://www.revshift.com/e30parts/e30ms34.jpg
http://www.revshift.com/e30parts/e30ms35.jpg

(SOLD) E30 Turbo 2.5" Downpipe (SOLD)
- Wrapped with header wrap
- V-band on both ends
- wideband o2 included
$80
http://www.revshift.com/e30parts/e30downpipe.JPG

(SOLD) M20 Valve Cover with Coils (SOLD)
Six ignition coils are mounted to the valve cover to be used with MegaSquirt-III. Plug wires included as well as a mess of wiring.
$150
http://www.revshift.com/e30parts/e30valvecovercoils.jpg

(SOLD) M20 Ishihara-Johnson Crank Scraper (SOLD)
- new
- steel
$60
http://www.revshift.com/e30parts/e30crankscraper.jpg

[ak-]

Someone buy this to relieve me of my anxiety.

[Myster-E]

Great prices for everything. Good luck with sale

[MR 325]

Some good stuff!

[vertvertvert]

Wanna sell me just the ARP head studs?

[John@Revshift]

Wanna sell me just the ARP head studs?

Not really, I kind of want them to stay with the block since its o-ringed.

[John@Revshift]

ttt

[John@Revshift]

Half of this stuff is gone. Its going quick. Don't hesitate to give me a call.

[Genkboy8o8]

if only that motor was in Hawaii... would have been sold already...

[John@Revshift]

if only that motor was in Hawaii... would have been sold already...

I'll ship it to Hawaii. I don't know how much it would be but its still the USA.

[John@Revshift]

The short block is sold.

[Simple_Smith]

Damn. why did I have to miss all this!?

[John@Revshift]

Still accepting offers on the 885 head.

[John@Revshift]

We now accept paypal

[John@Revshift]

bump