SOLD: E30 M3 5-Lug Swap COMPLETE

[MrSlacker]

SOLD

PLEASE READ THIS CAREFULLY!!!!

***Front LEFT (driver) strut housing is bent from the accident***


I am selling a complete E30 M3 5-Lug swap from a car that was in an accident. Front left housing is the only damaged part. Everything else is perfect.

Included:
Front Right Strut Housing
Front Left Strut Housing (bent)
Front Right & Lefts Spindles
Front Right & Left Calipers
Front Rotors
Front Brake Pads
Front ABS Sensors

Rear Right & Left Trailing Arms
Rear Right & Left Calipers
Rear Rotors
Rear Brake Pads
Rear ABS Sensors


The following items were replaced 2-3K miles ago:
Front Hubs
Rear Hubs
Rear E-Brake Components


Price: $2200 PICKED UP in Farmingdale, NY 11735


*SPRINGS AND SHOCKS ARE NOT INCLUDED IN THE PRICE*

[Mr. Lee]

E30 M3 suspension

I am interested in purchasing these parts. Lets talk.

[MrSlacker]

bump

[Freude am Fahren]

how many degrees was that sucker bent can you tell?

[MrSlacker]

how many degrees was that sucker bent can you tell?

Not sure. will try to measure tomorrow

[enigmaticdream]

Regarding the bent strut. You can bring it to a proper suspension shop and they should be able to bend it closer to spec. After that, I'd suggest reinforcing it and getting camber plates. The set I picked up for my 325 had a bent strut. I ended up getting it closer to spec and reinforced. I threw it on my M3 because I run camber plates on it. The M3's alignment is perfect.

GLWS!

[golde30]

that bent strut mite still work for somebody who wants to run those new chinese style coilovers, since they want you to cut the tube off anyways.

[enigmaticdream]

When fixing the strut, I would add webbing between the knuckle and strut tube. I can't find a picture of the reinforced one I have, but here is a pic of one of my struts while I was doing something to it.



You can see the gap to reinforce just above the cast iron bit of the strut housing.

[MrSlacker]

Thanks for the info guys. I know it can be fixed. I dont want to fix it because if it's a little off, I dont want to be blamed for it. I'd rather discount the price and not deal with fixing it.

Sent from my One using Tapatalk

[enigmaticdream]

I was just trying to inform potential buyers that they can fix it and how to. Camber plates would be required after the repair.

[MrSlacker]

I was just trying to inform potential buyers that they can fix it and how to. Camber plates would be required after the repair.

yup, appreciate the input :)

[MrSlacker]

will remove the rear end this weekend!

[enigmaticdream]

I found the picture for potential purchasers. After fixing the bent tube, have the shop reinforce the bottom of the tube where it mates with the cast iron part. After that add a reinforcement plate between the strut housing and knuckle.



Free bump for you sir.

[MrSlacker]

Everything is removed and ready for sale. I am no longer including shocks and springs in this sale. They can be purchased separately

[MrSlacker]

bump