Project Sell Off

[Zekerbox]

How much for the 2.8L crank?

PM'd

[Zekerbox]

Bump. Springs sold. bunch of parts still available.

[downforce22]

my buddy needs a manual driveshaft or possibly the getrag 260. I am local in co springs, let me know if you have the driveshaft and how much for the trans

[Zekerbox]

my buddy needs a manual driveshaft or possibly the getrag 260. I am local in co springs, let me know if you have the driveshaft and how much for the trans

I have both and I will sell them for $150

[K///Mikes]

Pm sent

[Zekerbox]

PM's replied and some prices added.

[glaude]

Pm'd Sent from my SM-G950U using Tapatalk

[Zekerbox]

Bump for some sold items and updated pics. I will try to add more pics next week.

[downforce22]

did you ever get in contact with my buddy about the driveshaft? I know you were supposed to meet u pa few weeks back it sounded like it didnt happen

[Zekerbox]

did you ever get in contact with my buddy about the driveshaft? I know you were supposed to meet u pa few weeks back it sounded like it didnt happen

I did contact him. He wasn't able to meet me based on schedules, and that's where it was left.

[merlinfe]

I would like the Adjustable and reinforced rear sub-frame. Can you PM me your best price shipped to 32223?

Thanks,

- Steve

[Zekerbox]

I would like the Adjustable and reinforced rear sub-frame. Can you PM me your best price shipped to 32223?

Thanks,

- Steve

I put a price on the subframe. I didn't correctly list it. It doesn't have the reinforcements for the diff installed yet. I can include them if you are still interested.

[drzhivago1965]

PM sent.

[Yayrea]

I'm selling my project car. Things have changed and I just don't have the time for it anymore. I bought a house and since then my project car has taken a back seat time and finance wise. I hate to give up on it, but I just don't have any more time or money. I would prefer to sell the entire project. I have well over my asking my price ($6000) in parts and a lot of them are new.

I do have the title for the chassis if you are interested in buying it.

Decided I will part out. HMU if you are looking for something that's not listed.

Car is not a roller! I can help load it on a flatbed with my father's tractor.

If you are looking for pictures you can see some in my build thread, otherwise, it will take me some time to get pics as the car/project is at my father's shop.

There's some stuff I may not have listed and some of the original parts from the car have been scrapped or sold.

I have access to affordable freight through my business and can facilitate any of the heaver items that way.

Any listed prices are without shipping or paypal fees

Items will be marked sold when I get payment. so if it's not marked sold it is available.

Chassis- 85 325e Coupe $750 with interior

98 M52B28 (Cylinder head rebuilt with new valve guild and seals)(Engine is completely disassembled and I'm parting it out as well)
Block is in good shape with factory hash marks and no visible ring ridge. Cleaned and painted
Crank and Cams have been professionally polished
5 Lug / e46 BBK kit (adapter kit bought here on the forums) original adapter set anodized blue
4.10 LSD w/ New z3m finned cover and speed sensor Sold
New Bilstein B8 Sports Shocks Front and Rear Sold
Used Front Strut Housings with no bearings/hubs (bare spindles) $150
New H&R Race Springs (50404-88) Sold
New UUC Spec E30 adjustable sway bars and end links $400
Adjustable rear sub-frame $250
New Rear diff reinforcement plates
New Trailing arm reinforcement plates
Euro Hella smiley headlights $250
New Red46 Sump Armor $175
Bimmerworld Sump Baffle installed in swap pan w/ dipstick, tube and gasket Sold
Reinforced front sub-frame (DIY welded, not pretty, but solid)
New Ireland Engineering Race/Street adjustable camber plates $225
New Turner Motorsports urethane reinforced rear shock mounts with reinforcement plates $125
New Condor Bushing - Trailing arms, subframe, transmission and Engine
New Bimmerworld FCAB
New Lemforder front Control arms $150 for both
New factory guibo and center support bearing
Getrag 260
Swap transmission brace $100
New UUC angled DSSR for Getrag to 24v swap version $100
New e36 Mishimoto Aluminum Radiator $250
New 16"spal fan/universal mount kit and gasket $85
Used Stock M52 headers w/ injection port welded and ceramic coated $150
Refurbished euro bumpers in powder-coated shadowline black complete set with all soft parts new $1200
Used ATE Porche 944 booster with master $100
Used E39 528i rear calipers - with rebuild kit
Used E46 M3 front calipers -with rebuild kit
Reprogrammed ECU with SAP/O2/EWS/Speed limiter delete $150
E36 DS2 17x7.5 square wheels W/ Falken Falken Azenis RT-615K - 205/40R17 (New Tires Mounted and heat-cycled) selling wheels with tires $1100
Used E46 330ci steering rack with new parts to rebuild parts and new tie rods and adapter/spacer kit $350
Delrin power steering delete plate $20
Door hinge reinforcement plates $20
New E46 M3 front Rotors - Zimmerman Blanks
New E46 325 Rear Rotors - ATE Blanks
New Brake lines ECS Tuning Braided lines $100
New E30 M3 Rear Hubs $200 Each
New E30 M3 Rear bearings $30 each - 3 available
New E36 Front Hub/bearing - FAG Hubs
New Brake Pads - OEM compound (For E46 and E39 Calipers)
Used Coolant expansion tank (late model) $30
Rear Main and most engine gaskets - Purchased full top and bottom gasket sets, rings, and bearings. (M52)
Short shift UUC EVO3 kit with new OEM selecter joint $275
Lug Stud kit $150
5mm front spacer and 17.5mm rear spacer (needed for 5 lug conversion kit)
Custom exhaust t304 stainless w/ B&B tri-flow muffler and resonator (will mate to M20 headers) $500

$100 for the front Lemforder control arms.. shipped to 95835. Will pay for shipping too.

[merlinfe]

Sent you a PM.