Hey guys, recently decided to part out my e30 because i was never using it and didn't have any luck selling the whole car. bummer. anyway, i have a lot of parts for sale. prices shown are shipped unless noted otherwise (such as on the spoiler that i would need to quote first). most of this stuff was put on the car less than 3 years ago and has under 10k miles unless otherwise noted. this isn't everything i have so i will update this as i have time to take more pics and list more stuff. on to the goods:
$250 shipped- Mtech1 steering wheel (its the larger 385mm one). freshly rewrapped by jordan at stitchedwheels about a year ago. the car never really sits out in the sun so it is still mint. black stitching. horn buttons, center emblem, and m stripe badge are all in good condition.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$275+ shipping- Kooglewerks handmade aluminum spoiler with joe's racing billet support rods. handmade by forrest at kooglewerks. super nice and unique. i dipped it black to see if i liked it before coating it so it can be peeled back to bare aluminum and you can do whatever you want with it. the support hardware is silver and black anodized. the spoiler alone is $300 and the support rods were about $120 for all 4. i will be traveling to orange county ca for thanksgiving so if you're in vegas or anywhere south of LA i can meet you and sell it in person (with it mounted on the trunk too if you want) and we can dodge shipping cost/hassle.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$40 shipped- set of hubcentric 8mm spacers for e30. full set of 4. no name spacers but work great. i used them to clear my rx7 brakes with my konig wheels.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$SOLD- Treehouse racing CABs. the solid lollipops that started it all. in good condition. rattle canned black but not the prettiest. bushings are still tight and solid. i bought these used about 5 years ago when i first got my e30 but have never had a single problem with them. i kept a little grease on the bushings to make them last forever.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$275 shipped- FC RX7 front BBK. comes with everything you need to bolt up and go. brackets are from cameron avery who was one of the first to produce these kits. the calipers were purchased as remans from rockauto so the seals and everything were new less than 10k ago. pads are hawk HPS with almost full life. the rotors are meyle hd corrado rotors that were professionally machined, not blown open with a grinder like a lot of people do on this setup. no track or autocross days on any of it. i also am including my custom brake ducts that i made for a late model e30 if the buyer wants them. i made the backing plates by hand and the duct adapters for the valence were 3d printed. the adapters are for late model ducts only but could probably be adapted to use on an early model if you're handy.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$110 shipped- Red46 sump armor skidplate for 24v swap. some scrapes and scratches but no dents or major damage. two of the captive nuts on the core support mount came undone when i was installing it on my car but all you have to do is hold them with a wrench when tightening or redo the tack welds on them before installing.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$125 shipped- VDO gauge setup for 24v swap. mounts in the center hvac vent hole on the dash. has oil temp, oil pressure, and volt gauges. comes with the harness that i made so all you have to do is run the sender wires into the engine bay and splice in power and light wiring. comes with an adapter to run the oil temp and pressure senders on a 24v M/S5X engine. the adapter bolts into the factory oil pressure sender spot and has holes for the factory sender and two 1/8" npt ports that house the included senders. you could also use a different adapter that is specific to whatever engine you have to run this setup. before i m50 swapped i used all of the same stuff on my m20 with an oil filter sandwich adapter instead.
how they look in the dash:
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$300 shipped- ST sway bar kit. bought this new some time ago and never installed it on the car before i decided to part out. comes with front and rear bars and all of the included ST hardware. the cheapest i could find these online was $345 shipped on amazon so you can still save a chunk of change here
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$250 shipped- Mtech1 steering wheel (its the larger 385mm one). freshly rewrapped by jordan at stitchedwheels about a year ago. the car never really sits out in the sun so it is still mint. black stitching. horn buttons, center emblem, and m stripe badge are all in good condition.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$275+ shipping- Kooglewerks handmade aluminum spoiler with joe's racing billet support rods. handmade by forrest at kooglewerks. super nice and unique. i dipped it black to see if i liked it before coating it so it can be peeled back to bare aluminum and you can do whatever you want with it. the support hardware is silver and black anodized. the spoiler alone is $300 and the support rods were about $120 for all 4. i will be traveling to orange county ca for thanksgiving so if you're in vegas or anywhere south of LA i can meet you and sell it in person (with it mounted on the trunk too if you want) and we can dodge shipping cost/hassle.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$40 shipped- set of hubcentric 8mm spacers for e30. full set of 4. no name spacers but work great. i used them to clear my rx7 brakes with my konig wheels.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$SOLD- Treehouse racing CABs. the solid lollipops that started it all. in good condition. rattle canned black but not the prettiest. bushings are still tight and solid. i bought these used about 5 years ago when i first got my e30 but have never had a single problem with them. i kept a little grease on the bushings to make them last forever.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$275 shipped- FC RX7 front BBK. comes with everything you need to bolt up and go. brackets are from cameron avery who was one of the first to produce these kits. the calipers were purchased as remans from rockauto so the seals and everything were new less than 10k ago. pads are hawk HPS with almost full life. the rotors are meyle hd corrado rotors that were professionally machined, not blown open with a grinder like a lot of people do on this setup. no track or autocross days on any of it. i also am including my custom brake ducts that i made for a late model e30 if the buyer wants them. i made the backing plates by hand and the duct adapters for the valence were 3d printed. the adapters are for late model ducts only but could probably be adapted to use on an early model if you're handy.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$110 shipped- Red46 sump armor skidplate for 24v swap. some scrapes and scratches but no dents or major damage. two of the captive nuts on the core support mount came undone when i was installing it on my car but all you have to do is hold them with a wrench when tightening or redo the tack welds on them before installing.
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$125 shipped- VDO gauge setup for 24v swap. mounts in the center hvac vent hole on the dash. has oil temp, oil pressure, and volt gauges. comes with the harness that i made so all you have to do is run the sender wires into the engine bay and splice in power and light wiring. comes with an adapter to run the oil temp and pressure senders on a 24v M/S5X engine. the adapter bolts into the factory oil pressure sender spot and has holes for the factory sender and two 1/8" npt ports that house the included senders. you could also use a different adapter that is specific to whatever engine you have to run this setup. before i m50 swapped i used all of the same stuff on my m20 with an oil filter sandwich adapter instead.
how they look in the dash:
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
$300 shipped- ST sway bar kit. bought this new some time ago and never installed it on the car before i decided to part out. comes with front and rear bars and all of the included ST hardware. the cheapest i could find these online was $345 shipped on amazon so you can still save a chunk of change here
Untitled by mitch allen, on Flickr
Untitled by mitch allen, on Flickr
Comment