Announcement

Collapse
No announcement yet.

Brand New 16x7.5 ET 25 ESM BBS RS Style Rims(NOT KONIG)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by widebodye30 View Post
    These wheels are 19 lbs and we are the sole importer of these wheels. ESM is our new wheel line.
    2 lbs. heavier than Remembers, too.

    Never heard of ESM, reputable company?
    Originally posted by Hon2BMW View Post
    Any chance of these coming in a 16x8 or 16x9 with a larger lip at any point?

    I really can't see putting anything smaller than a 2.25-3" inch lip on the back and being happy with it, these would be fine for the front.

    If they will eventually come in larger widths with a bigger lip you've got your first customer for those.
    Same. If these end up coming in a wider width, I might just have to swap out.

    Comment


      #32
      Ary, these wheels look great. Any pictures without the center caps available? Also, any pics mounted on an E30 yet?
      BimmerHeads
      Classic BMW Specialists
      Santa Clarita, CA

      www.BimmerHeads.com

      Comment


        #33
        Originally posted by Mr. Anderson View Post
        Great looking wheels! I love the flatter face, and the lower profile center cap, but I don't like the holes in the corners of the cap, or that the lips are so high-polish. The offset of the Remembers is better though, ET20 rather than 25. What's the weight on them, and who is the manufacturer?
        They're ET25 because the wheel is 1/2" wider than the Remember. 1/2" = 12.7mm, so to be the same offset as the Remember they'd be ET26.35. Technically, these have a lower total offset that the Remember, or a more aggressive (wider stance) fitment.

        Tim


        1987 E30 cabrio | Bumper swap | H&R Sport | Koni Yellow | Eibach Sways | BavAuto strut bar | Cardinal seats
        MTech2 wheel | Husco Armrest | Smoked Hella Smileys | 5k HID | Stromung | RS003
        | Shadowline | Amber Fogs | Too much else to list



        Comment


          #34
          Ah yes, good point.

          Comment


            #35
            +1 for pics from the side.

            1991 LS1 Swapped 318is
            Instagram:
            https://instagram.com/saltybeast/
            LS Build Thread:
            https://www.r3vlimited.com/board/for...s-e30-ls1-swap

            Comment


              #36
              Originally posted by ian e30 318is View Post
              +1 for pics from the side.
              And good Sir - a pic of the cap off - as many of us like to run wheels WITH OUT caps at times.
              Originally posted by Matt-B
              hey does anyone know anyone who gets upset and makes electronics?

              Comment


                #37
                Mate they are hot! good on you for inporting them. Im sure they will sell well. I need them in 16x8.5 if im going to change from my schnitzers
                sigpic340hp V8 e30 FINISHED!!!!!
                Quick vid for ya ;) http://www.youtube.com/watch?v=vp5Eaf8xOgM
                NEW One on the track :)
                http://www.youtube.com/watch?v=K-AX5SzSLnk
                Cleaning up some 911s and Jap turbos
                http://www.youtube.com/watch?v=Ad79wsLdle4

                Comment


                  #38
                  For the record, these are PERFECT for running 225/45/16 tires on an E30 without even rolling the fenders. Great fitment.

                  Or, if you want the Euro-poke and stretch thing, run 15mm spacers with 195/50/16 tires.

                  Jay

                  Comment


                    #39
                    I have these same wheels fitted to my project E30.
                    Mine are badged as Lenso,wether that is the original maker or not im not sure.
                    Ill get some pics up in a couple of hours :)

                    94 316i Touring M52B28
                    Made in Germany perfected in Britain!

                    Comment


                      #40
                      Originally posted by eko View Post
                      I have these same wheels fitted to my project E30.
                      Mine are badged as Lenso,wether that is the original maker or not im not sure.
                      Ill get some pics up in a couple of hours :)
                      Like these??

                      __________________
                      1987 Toyota Landcruiser V8

                      Comment


                        #41
                        ^except they only made up to 16x7 from what i can find. looks pretty similar though.
                        IG: @Baye30

                        FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

                        Comment


                          #42
                          Heres a few shitty pics to give you an idea of what they look like fitted.
                          Drop is 60/40 H&R but the front still needs to settle as its only been on a couple of days.
                          Tyres are 205/45/16 Toyo T1R although wish id have gone for 225`s now.
                          These are 7 1/2 x 16".

                          Not a fan of the bolts in the centre nut myself but have a mate who is an expert with a tig set so was planning on asking him about welding them up and polishing back.
                          Also got a set of 50mm domed roundels on order.






                          94 316i Touring M52B28
                          Made in Germany perfected in Britain!

                          Comment


                            #43
                            [EDIT] Read below...
                            Last edited by george graves; 03-19-2008, 02:09 PM.
                            Originally posted by Matt-B
                            hey does anyone know anyone who gets upset and makes electronics?

                            Comment


                              #44
                              Our rims are not the same as those rims. Ours are 4x100 only. We will end up making the stagg. rear in 8.5 in the near future.
                              www.esmwheels.com
                              www.dtmfiberwerkz.com
                              Toll Free: 800.729.5450
                              Local: 818.341.9903

                              Comment


                                #45
                                The konig wheels are 18.5 lbs and our wheels are 19.0lbs.
                                www.esmwheels.com
                                www.dtmfiberwerkz.com
                                Toll Free: 800.729.5450
                                Local: 818.341.9903

                                Comment

                                Working...
                                X