M20 Long Tube Header GB Feeler

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • cganne
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat
    17. E30huh, no coat
    18. txtorquemade, m20 no coating
    19. 88superetabd , m20 no coat (unless coating is cheap)
    20. e304lyfe
    21. streichholzschächtelchen coated
    22. zm blue devil m20 non coated
    23. zm blue devil m42 non coated
    24. MrSlacker, m20, coating depending on cost
    25: woodisgood. M20
    26:thornado327i: M20 / coated
    27 NC325iC - m20 coated
    28. Overlord475 - m20 coating depending on cost
    29. Peaveybassist - m20 no coat
    30. InuFaye-m20 coating depending on cost.
    31. richardkeith97 - m20 coating depending on cost
    32. handysmurf59 - m20 coating depending on cost.
    33. Schtozo - m20, coating depends on cost
    34. DrJosh - M20, coating depends on cost
    35. wh00sh - M20, coating depends on cost
    36. 2slowe30-M20 no coating
    37. RagtopE30-M20 no coating
    38. pilotskillse30-M20 coating
    39. Cream-m20, coating depends on cost
    40. cganne-M20, no coating

    Leave a comment:


  • Cream
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat
    17. E30huh, no coat
    18. txtorquemade, m20 no coating
    19. 88superetabd , m20 no coat (unless coating is cheap)
    20. e304lyfe
    21. streichholzschächtelchen coated
    22. zm blue devil m20 non coated
    23. zm blue devil m42 non coated
    24. MrSlacker, m20, coating depending on cost
    25: woodisgood. M20
    26:thornado327i: M20 / coated
    27 NC325iC - m20 coated
    28. Overlord475 - m20 coating depending on cost
    29. Peaveybassist - m20 no coat
    30. InuFaye-m20 coating depending on cost.
    31. richardkeith97 - m20 coating depending on cost
    32. handysmurf59 - m20 coating depending on cost.
    33. Schtozo - m20, coating depends on cost
    34. DrJosh - M20, coating depends on cost
    35. wh00sh - M20, coating depends on cost
    36. 2slowe30-M20 no coating
    37. RagtopE30-M20 no coating
    38. pilotskillse30-M20 coating
    39. Cream-m20, coating depends on cost

    Leave a comment:


  • NC325iC
    replied
    Originally posted by MaksV
    correct. it is the same company makeing the e30 ones for us as well.


    here is the link to the original group buy if anyone is interested.
    that thread is pretty useless, but this one might be of some help

    Leave a comment:


  • pilotskillse30
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat
    17. E30huh, no coat
    18. txtorquemade, m20 no coating
    19. 88superetabd , m20 no coat (unless coating is cheap)
    20. e304lyfe
    21. streichholzschächtelchen coated
    22. zm blue devil m20 non coated
    23. zm blue devil m42 non coated
    24. MrSlacker, m20, coating depending on cost
    25: woodisgood. M20
    26:thornado327i: M20 / coated
    27 NC325iC - m20 coated
    28. Overlord475 - m20 coating depending on cost
    29. Peaveybassist - m20 no coat
    30. InuFaye-m20 coating depending on cost.
    31. richardkeith97 - m20 coating depending on cost
    32. handysmurf59 - m20 coating depending on cost.
    33. Schtozo - m20, coating depends on cost
    34. DrJosh - M20, coating depends on cost
    35. wh00sh - M20, coating depends on cost
    36. 2slowe30-M20 no coating
    37. RagtopE30-M20 no coating
    38. pilotskillse30-M20 coating

    Leave a comment:


  • MaksV
    replied
    Originally posted by NC325iC
    http://shop.bimmerbrakes.com/p2076/B...duct_info.html

    not gonna lie those headers look nice, if they are made with the same level of quality then they might be good. dyno numbers of course would be helpful though.
    correct. it is the same company makeing the e30 ones for us as well.


    here is the link to the original group buy if anyone is interested.

    Leave a comment:


  • NC325iC
    replied


    not gonna lie those headers look nice, if they are made with the same level of quality then they might be good. dyno numbers of course would be helpful though.

    Leave a comment:


  • MaksV
    replied
    Originally posted by IDM
    Container came in? I don't get it? Aren't this supposed to be made by you guys here in the US? So all this is is a list to get the long tube stahl/bavauto chinese copies one as seen on ebay for under $200?
    Originally posted by Overlord475
    Nice!

    Perfect timing too! Just starting my stroker build
    Originally posted by MaxBell
    Lol, breath dude. Shipping often happens within the US...

    everybody calm down. I was quite clear that these would be made in Taiwan from the beginning. You wanna pay 800 bucks for header - then I can have them made in the US. Otherwise they are made overseas. If you look back in this thread Iw as quite clear about it.

    Leave a comment:


  • NC325iC
    replied
    ^ what he said,

    you'll notice that i said id be in for a set depending on their design and the level of manufacturing that went into them, all of the sudden my name is on the list for people to buy them and theyre ready to buy, but no one has seen them...

    Leave a comment:


  • der affe
    replied
    Originally posted by asheridan07
    You guys need to read.... It was stated in the very first post that these headers are being sourced out by BimmerBrakes through their header manufacture. The same company that made their E46 headers... These are direct fit budget "eBay" headers for under $200 shipped with an X-pipe included... Even if they are made in China, so what. We've all blow $200 on dumber things.

    And, how could he post up dyno result without having a set shipped to him........ in oooo say a container?
    You are talking out your ass. Have YOU ever built a header? Would you just slam together some tubing and call it good then order 100 of them? I build custom headers, and you would not make a production header without a prototype and some dyno results.

    These were supposed to be designed from scratch, then dyno tested with posted results. It was stated that they would not be copies of another pre existing header design.

    If this was the case, what is the deal with a container all of the sudden?

    There is really nothing wrong with the ebay headers, I am running the hartge/supersprint copies on my own car and other than a flange alignment issue (that is well know and easily fixed). It was more efficient time and money wise to buy a set for $161 shipped that were a copy of a known good and working design then for me to go out and reinvent the wheel at this point.

    There is also a bavauto/Stahl copy that is made in china.

    I just want to see a pic of the product and a dyno sheet as stated.

    Leave a comment:


  • Overlord475
    replied
    These are the E46 headers he was selling over at e46fan



    They look pretty legit to me. If the M20 headers are of that quality then I'll be happy at $200

    Leave a comment:


  • asheridan07
    replied
    You guys need to read.... It was stated in the very first post that these headers are being sourced out by BimmerBrakes through their header manufacture. The same company that made their E46 headers... These are direct fit budget "eBay" headers for under $200 shipped with an X-pipe included... Even if they are made in China, so what. We've all blow $200 on dumber things.

    And, how could he post up dyno result without having a set shipped to him........ in oooo say a container?

    Leave a comment:


  • der affe
    replied
    I am thinking that, but am waiting on pics and posted dyno results before I pass judgment.

    Leave a comment:


  • Justin B
    replied
    China?

    Leave a comment:


  • der affe
    replied
    Originally posted by MaksV
    cntainer came in today - should have them soon.
    I thought they were still in the prototype stage and you had no dyno results yet???? Why would you have a container of them if you had no working prototypes to show us pictures of and no dyno results to post?

    Leave a comment:


  • MaxBell
    replied
    Originally posted by IDM
    Container came in? I don't get it? Aren't this supposed to be made by you guys here in the US? So all this is is a list to get the long tube stahl/bavauto chinese copies one as seen on ebay for under $200?
    Lol, breath dude. Shipping often happens within the US...

    Leave a comment:

Working...