M20 Long Tube Header GB Feeler

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • CabbE30
    replied
    ^^ Alright cool, I wanted to keep the stock exhaust.

    Leave a comment:


  • MaksV
    replied
    Originally posted by CabbE30
    Making these to require custom exhaust?
    nope they will bolt right up to a stock exhaust but it should be pretty easy to modify to fit any sort of aftermarket setup.

    Leave a comment:


  • CabbE30
    replied
    Making these to require custom exhaust?

    Leave a comment:


  • Streichholzschächtelchen
    replied
    Originally posted by TrentW
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat
    17. streichholzschächtelchen M20, coat depending on $

    Leave a comment:


  • TrentW
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat

    Leave a comment:


  • MaksV
    replied
    great lets keep the list going. when we place the order it will most likely be for 50 units at once, so we want to have as many as possible claimed before we even get the order in.

    Leave a comment:


  • maximus_pr
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat

    Leave a comment:


  • MaksV
    replied
    great keep the list going. here is a smll update:

    material: T304 SS
    Flange Thickness: 7/16
    Post collector pipe - 2" (within a 10th)
    Gauge: 1.5mm

    we are working on making the runners 1 5/8, but clearance may be an issue in which case it may end up being 1 1/2

    REMEMBER these are estimates based on our design, and the final product may be different. However I will notify you of any changes.

    Leave a comment:


  • BigTe30
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating

    Leave a comment:


  • MaksV
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated

    Leave a comment:


  • dkmr
    replied
    I'd be interested in an m20 non coated

    Leave a comment:


  • MaksV
    replied
    In that case I am not sure about the clearance issue. When we get around to installing the demo ones we will see if chages need to be made. They will be the same diameter as the e46 headers were. Anthony should be getting more of those in stock today so he told me he would measure them.

    I want to say they are 1 5/8 but I will know for sure tonight. The merge from 3-1 willl be designed as smoothly as possible.

    Leave a comment:


  • der affe
    replied
    well THESE are the STAHL/BAV AUTO copies sold on EBAY
    http://cgi.ebay.com/ebaymotors/BMW-E...Q5fAccessories

    are these what yours are going to look like?
    they do have a ground clearence issue on the lowest tube.

    the 1 1/2" primary tubing diameter is kind of small for most non stock motors. they also do not have a collector cone, but that does not make a GREAT difference in a properly designed header, but every little bit helps.

    i would suggest going with 1 5/8" primaries for a more universal applications or if you can, offer them in both 1 1/2" and 1 5/8" primaries
    Last edited by der affe; 11-03-2010, 11:43 PM.

    Leave a comment:


  • MaksV
    replied
    I am not sure as tot eh answers to your questions but I will get back to you when I get a chance to speak to anthony.

    However I am unaware of a ground clearance issue with the headers. We are modeling ours after the BavAuto headers, they are similar to STAHL but I am not sure if they are exact.

    Leave a comment:


  • der affe
    replied
    what size primaries are you planning on using 1 1/2" 1 5/8" ?

    have you thought about the ground clearence issues found with the STAHL long tube headers since that is that style you were looking to emulate?

    what wall thickness tubing and flange thickness were you planning on?
    Last edited by der affe; 11-03-2010, 10:40 PM.

    Leave a comment:

Working...