Announcement

Collapse

Classified Forums - Read this first!

Here's a few simple guidelines for this forum. Failure to follow any of these rules will be grounds for your thread to be closed


Post your information
Post as much info as you can. Say where you are located, where the part is located, the best way to get in contact with you, if you are willing to ship, etc.


Post the items information
Post as much info as you can. A price must be posted, as well as pictures of the item(s). Post as many pictures as you can, even if it is a common item. A picture tells a thousand words, but it can also conceal another thousand. Links to hosted galleries of images are acceptable, links to eBay and/or Craigslist are not. Once the item sells, please do not edit your ad to remove the price. Many people search through old ads to get an idea what their item is worth.


If listing a car
-Post the year and model
-An accurate mileage. If the odometer is broken, post what it is currently at and how many miles you believe it has
-Any aftermarket modifications
-Any known issues or damaged areas
-Post a price
-As many pictures as possible of every area


If listing wheels and/or tires
-Post the brand and model
-Post as many specs as you can, including but not limited to tire size, tread remaining, wheel diameter, width, offset, bolt pattern and centerbore, if multi-piece the lip, barrel and center size. If they have been redrilled post the original bolt pattern and where it was done.
-Any imperfections, including but not limited to curb rash, bends, cracks, repaired areas, scratches. If tires, any gashes, bubbles, cupping and curb rash
-Post a price
-As many pictures as possible of every wheel


If listing Parts
-What brand and what models it can be used on
-An accurate description
-How long it/they have been used for
-Any imperfections
-Post a price
-As many pictures as possible of every area


Miscellaneous items
-A detailed description of the item
-How long it/they were used for
-Any imperfections
-Post a price
-As many pictures as possible of every area


WTB threads
-Be as detailed as possible
-List exactly what you want, what variations you will accept, colors or materials, etc.
-Post what you won't accept. This includes imperfections, colors, models, etc.
-Post what you are willing to pay. Only douchebags will bump up their price if your price is higher then theirs.
-Where you are located and if you would prefer local pickup only


In case the point was not made, everything being sold must include a price and as many pictures as possible.
-This is not eBay or Craigslist. Do not post links to either for your ad. The same goes for other forums. Either post your information here or have your thread closed.
-Feeler threads are not allowed. If you're not sure about selling it, don't post it.
-If listing your item for trade, post what you are looking for, what you feel your item is worth, if you would like cash back or if you have cash to put on top
-Thread crapping is not allowed. If you're not interested in purchasing the item for sale or have nothing positive to add, please stay out of the thread or else be prepared for a time out. If you complain about the time out, it will be extended.
-Only bump your thread once a day. You are allowed to respond to others more then once a day.
-If listing multiple items, post them in one thread. Exceptions are cars and wheels.
See more
See less

PnP Megasquirt Systems - Updated 2/16, Pricing Change

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • roguetoaster
    replied
    Derek hasn't logged on to r3v since 7/18. His site(s) are also gone again, but google does have this info:

    Dederic Motorsports
    Address: 8945 Quartz Ave, Northridge, CA 91324
    Open ⋅ Closes 6PM
    Phone: (818) 527-5001

    However, the number might be a google voice number, and there's no specific VM.

    Basically, he seems to come and go, but is sometimes reachable, so keep trying if you are really interested.

    Leave a comment:


  • Bme3092
    replied
    Has anyone gotten I contact with blueapplesoda at all??

    Leave a comment:


  • EXOVCDS
    replied
    Got it working... thanks again!!!!
    Once I've got the exhaust cutout in place, it'll be time to make some noise.

    Sent from my LG-H933 using Tapatalk

    Leave a comment:


  • EXOVCDS
    replied
    Yes, sorry... what I meant by jumper was the plastic coupler that I circled in green. That coupler can connect or disconnect 2 pins depending on how it's sitting. Initially I thought that was a "jumper" that needs to be moved.

    I will be soldering / connecting the diode & pin 40 hole this weekend.

    Thanks again for the huge help / info!!!

    Sent from my LG-H915 using Tapatalk

    Leave a comment:


  • Digitalwave
    replied
    It's not a jumper. There was a trace missing on the board, so the diode and the pin are not connected. Which is why you don't have 5v at pin 40. You have to solder a small wire between those two points pictured.

    Leave a comment:


  • EXOVCDS
    replied
    My bad... I'm not the greatest with circuit boards. I see the diode and the pin 40 hole.

    I'll update later this week! [emoji106]

    Sent from my LG-H933 using Tapatalk

    Leave a comment:


  • EXOVCDS
    replied
    Just compared with my board V1.2, seems different. [emoji3525] Green circle is the only visible jumper that I can see.

    http://fkh161.ca/BMW/Jumper.jpg


    Sent from my LG-H933 using Tapatalk

    Leave a comment:


  • EXOVCDS
    replied
    Thank you very much!!!!

    I'm about to install my exhaust cutout... so this will be perfect timing to get LC working.

    Sent from my LG-H933 using Tapatalk

    Leave a comment:


  • Digitalwave
    replied
    Hey Thomas,

    Luckily I also had the same problem a while back and I have the solution for you! The older boards are missing a trace from the Schottky diode. You'll need to solder in a jumper wire on the board as pictured here. Then you should be seeing 5v at pin 40, and when you ground it, LC will be enabled. FLEX is the correct input for your TunerStudio settings. Happy 2-step!

    Board versions up to v1.3 was missing a trace between the 4 diodes above the DMS logo and pin 40. This was corrected on v1.4. You will need to place a jumper between that diode pad and pin 40 to activate the switch input circuit, as shown in yellow in the picture:

    [/url]

    This should be the Blk-Gry wire on the black 4-pin (missing two) auxiliary connector, paired with a white 4-pin, about 6-12 inches away from the main wire harness 55-pin connector. Pin 40 goes to black-grey (oe use: a/c pressure sw), and p41 goes to vio-gray (oe use: a/c control sw). These are repurposed for switch inputs. Ground to activate, and set the correct setting in tunerstudio.

    Leave a comment:


  • EXOVCDS
    replied
    I've read through various megasquirt threads with no results to what I am looking for.

    My apologies to group / forum if this is not the correct place for this question... since Dederic Motorsport is MIA (website, email, phone calls etc).

    It's almost been 2 years since I have installed a KAMOTORS turbo system on my E34... using one of the Dederic Motorsport ECU's.

    The car's running fine... the ECU is fine, but I have a question about Launch Control. I misplaced my installation instructions, but saw the sticker on the side of the ECU (about Pin 40 for Launch Control).

    http://fkh161.ca/BMW/DMSsmall.jpg

    Grounding that pin does nothing (after enabling Launch control in Tuner Studio). I'm hoping I'm just missing a step.

    Hope that someone has been-there-done-that.

    Thanks!

    Thomas... back to searching some more! :)

    Leave a comment:


  • AWDBOB
    replied
    Originally posted by zaq123 View Post
    I missed that post, do you have a link? BigD? His new username?
    No I was just joking about the "BigD" because his name is Derek. That's what he emailed me. Just email him.

    support@dedericms.com
    http://www.dedericms.com/

    Leave a comment:


  • zaq123
    replied
    Originally posted by AWDBOB View Post
    As of January 18:
    I missed that post, do you have a link? BigD? His new username?

    Leave a comment:


  • AWDBOB
    replied
    Originally posted by zaq123 View Post
    Is he accepting orders?

    Sent from my VS985 4G using Tapatalk
    As of January 18:

    Originally posted by BigD View Post


    I am running a group buy right now, if you visit my website www.dedericms.com you can see everything that you get. Some accessories have been updated, but for the most part itís the same. It also comes with a base tune so most of your settings will be correctly set from the get go, just not tuned for your specific setup. The only difference with the one on my website and the one you will get is that the one you ill get will be setup for wasted spark.

    Leave a comment:


  • zaq123
    replied
    Originally posted by AWDBOB View Post
    I emailed him and he got right back to me. I believe he's doing another run of them right now.

    support@dedericms.com
    Is he accepting orders?

    Sent from my VS985 4G using Tapatalk

    Leave a comment:


  • AWDBOB
    replied
    I emailed him and he got right back to me. I believe he's doing another run of them right now.

    support@dedericms.com

    Leave a comment:

Working...
X