CA Tuned HD Axles Group Buy!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • catuned
    replied
    This is to be done on the outside of the axles towards the differential.
    Not on the inner side where it goes in to the hubs. Any one with questions is always able to email us: sales@catuned.com thank you!

    Leave a comment:


  • redsubdivisions
    replied
    Originally posted by the imitator
    When i picked mine up I was told that the pancake side of the axle needs to be Packed, which is why they are zip tied together. I also sent Igor an email regarding the grittyness, and mine even had minor binding upon a slight rotation while dry. I wasn't worried because these are indeed dry! After an email with Igor he told me they will free up upon packing and using.

    Never heard anything about taking boots off
    He replied back to an email I sent to him earlier and gave me a similar answer (here was his response to me):

    "Yes we include the grease packs with the axles. The is on the outside of the axles on the differential sides. Everyone should have gotten grease packs in the box with the axles. It's not a hard thing to do but very important. One pack per axle. Thanks for emailing".

    Leave a comment:


  • the imitator
    replied
    When i picked mine up I was told that the pancake side of the axle needs to be Packed, which is why they are zip tied together. I also sent Igor an email regarding the grittyness, and mine even had minor binding upon a slight rotation while dry. I wasn't worried because these are indeed dry! After an email with Igor he told me they will free up upon packing and using.

    Never heard anything about taking boots off

    Leave a comment:


  • redsubdivisions
    replied
    Originally posted by lifeiskaos
    Definitely not. Mine almost felt gritty out of the box. There was a little bit of grease in the boots, but none in the cv's. I'm glad i have the tool to release and reuse the boot clamps

    Not a huge deal, just think we should be warned so we don't blow our new axles ;)
    I've emailed Igor to clarify if there is anything else needed to complete this. the last thing we all need is the axle dumping out because of something relatively minute.

    Leave a comment:


  • lifeiskaos
    replied
    http://www.amazon.com/Lisle-30500-Bo...v+clamp+pliers

    Leave a comment:


  • PiercedE30
    replied
    What tool would that be?

    Leave a comment:


  • lifeiskaos
    replied
    Originally posted by redsubdivisions
    Keep us updated on this. I was under the impression they were ready to go from the box.
    Definitely not. Mine almost felt gritty out of the box. There was a little bit of grease in the boots, but none in the cv's. I'm glad i have the tool to release and reuse the boot clamps

    Not a huge deal, just think we should be warned so we don't blow our new axles ;)

    Leave a comment:


  • redsubdivisions
    replied
    Originally posted by lifeiskaos
    Got mine today. They look good, but the CV's are dry. I guess I will remove the boot clamps and pack them. At least grease is included.
    Keep us updated on this. I was under the impression they were ready to go from the box.

    Leave a comment:


  • lifeiskaos
    replied
    Got mine today. They look good, but the CV's are dry. I guess I will remove the boot clamps and pack them. At least grease is included.

    Leave a comment:


  • Pipes
    replied
    Paid- thanks for the good guy deal

    Leave a comment:


  • catuned
    replied
    All Paid orders will ship out Today. Fedex
    Thanks Guys!

    Leave a comment:


  • redsubdivisions
    replied
    I'm all paid up as well. Can't wait to get these!

    Leave a comment:


  • PiercedE30
    replied
    Paid!

    Leave a comment:


  • redsubdivisions
    replied
    Another bump. This is still going on. PM me for a link to the group buy price on the website. This is going to be a limited run.

    Leave a comment:


  • redsubdivisions
    replied
    Gotta make it Friday for me. That's payday for me as well.

    Leave a comment:

Working...