CAtuned HD Axle group buy! (CLOSED!!)

[FLG]

Is that 100%. The bearings are different sizes along with the trailing arms. I've been looking for an answer for a few days. I snapped an axle at the track.

Sent from my SM-G900W8 using Tapatalk

Ill double check, as far as I know non abs Vs abs is just the ring. Will let you know shortly

[SamE30e]

Will fit either way, the only difference in axles for non abs equipped cars was the ring not being there but they are all interchangeable with ring or without.

Is that 100%. The bearings are different sizes along with the trailing arms. I've been looking for an answer for a few days. I snapped an axle at the track.

Sent from my SM-G900W8 using Tapatalk

[FLG]

Will these fit a 85 325e (Early model) with the abs ring removed?

Sam

Will fit either way, the only difference in axles for non abs equipped cars was the ring not being there but they are all interchangeable with ring or without.

[SamE30e]

Will these fit a 85 325e (Early model) with the abs ring removed?

Sam

[Lurker27]

Put me down for one

[berlow94]

Extremely happy with my set!
After years of killing a set of stock axles per year on my 280 whp track car, these things still look brand new! Car is only ever driven balls-to-the-wall...

So confident I even safety wired all of my diff-flange bolts together 😉

[redsubdivisions]

I'm interested. Who has run this setup???

I've run this setup for a couple months. I had to send one back for warranty for a torn axle boot, so right now I am running a "stock" axle and the other side is a CA Tuned axle. I put my car up on the lift yesterday to check to hear some clunking I had in the rear. The "stock" axle had play and was pretty loose, whereas the CA Tuned axle was pretty solid and tight. This is on a 330+whp turbo M20 with an LSD and a 4-puck clutch.

It's a pretty solid setup and if it continues to hold up to the occasional abuse, I plan on getting their coilovers in the future as well to compliment the setup.

[FLG]

I'm interested. Who has run this setup???

Besides myself there's a handful who posted in the review thread and countless others outside of r3v

[Holland]

I'm interested. Who has run this setup???

[FLG]

Thanks bud. I had pmed him earlier

[unloadedak]

Do these work on a e30 with 318ti rear end?? From what I searched they should but I am not 100%, sure.

yes they will work no problem.

[wildedge93]

Do these work on a e30 with 318ti rear end?? From what I searched they should but I am not 100%, sure.

[FLG]

Please excuse the non pretty pics but as you can see, not just rebranded axles. Assembled in house.

[FLG]

There was one guy who commented on my instagram post that these were being launched behind a 900wtq car. Granted CAtuned cannot guarantee that, but they do work well.

[FLG]

are the cages made from chromoly as well? I was under the impression those exploded before the shafts actually broke. Awaiting the internal pictures before deciding if I want these on my LS car

The cages are not chromolly but they are larger and heat treated.