42 Draft Designs Spacers and Adapters

[8380 Labs]

keep em comin!

[mkcman17]

after having these on for a bit over a month, i have one question/concern.

i'm not sure if i'm the only person that had an issue with this, but the nuts tightened themselves to well over 100 lbs/ft after first fitment (i torqued them with a wrench to 75-80 lbs/ft) i don't typically have access to an impact gun, so i attempted to remove them with a 6-point/breaker and ended up nearly rounding off about half the nuts (mixture of very shallow nuts and deep center wheels). i went ahead and purchased some 75mm nuts from motorsport tech (problem solved), but i was a little concerned with how soft the nuts were considering their shallow nature.

[8380 Labs]

i haven't heard from anyone else who had that experience - i'll pass that onto the 42 draft guys, thanks.

[mkcman17]

:up:

[Jszy25]

Payment sent.

[8380 Labs]

:up:

here's 42 draft's response when i passed your issue onto them:

"We verified that those were the correct lugs, they should not have rounded out like that. You may need to use a deeper socket to get the entire lug nut head in the socket. The socket might have been bottoming out on the stud on the adapter so it could only grab onto half of the head or so which could cause it to weaken and round. With the entire head of the nut in the socket it will not round though."

[deadlydave]

This has probably been asked before, but do the 4x100 20 and 25mm spacers bolt to the hub, and then use a 2nd set of bolts to attach the wheel? Those are some fine looking spacers and the price can't be beat. It looks like that's how the 5-lug ones are but I couldn't find pics of the 4-lug ones.

Thanks in Advance,
-Dave

[8380 Labs]

the standard spacers (4x100, 5x100, etc. etc.) come with longer lug bolts and sandwich between the wheel and hub - they are not "adapter style" spacers that bolt to the hub first.

[TrippinBimmer]

the standard spacers (4x100, 5x100, etc. etc.) come with longer lug bolts and sandwich between the wheel and hub - they are not "adapter style" spacers that bolt to the hub first.

Can we get it with Adapter Style? And also different hub bore? I have some Works Emotion CR Wheels from my Civic days I like to use....

[8380 Labs]

yup, that's not a problem - email me at info@8380labs.com and i'll get you set up, thanks!

[quillbro]

Got mine yesterday and mounted up!



Took a bit of time to get the first one on, but once I figured out how to get that kidney thing lined up it was a breeze.







mmmm style fives

whats size are those wheels?

[8380 Labs]

Those are 16x8 et20 with 205/45s.

[Dj Buttchug]

aight, im in the mix on these. Pm sent

[8380 Labs]

replied.

up!

[ACHTUNG]

Do you make an adapter that's 4x100 to 4.114.3 (4x4.5)? If so, what widths do you offer with this configuration? thanks