Anyone interested in supercharger brackets?

[White325is]

Is one of them friends the one that shant was talking about?

So 3 for you and 1 for shant?

[zav3n]

hey i acually have Another friend that wants one to so it gunna be x 3 for me....

[White325is]

Yup, I picked up an ABS unit today so I can check tomorrow 100%

[Dominic49]

let me know on abs i'll be down most likely.

[White325is]

nwvb bmw added to the list. I got a ABS unit I will be trying tomorrow. :)

[416stroker]

I am more interested in the twin screw design for the power delivery. The Vortex style is just a belt driven turbo, so it has lag and uses up some of the power from the motor.

A twin screw kills more power than a centrifugal. And yes it does have more low end but the make less HP than a centrifugal but theres no "Lag". They just sound cooler.

[asubimmer]

why would you want this? do you already have a roots type charger in your garage? other than that, i really can't see an advantage. normally, this setup doesn't use a bracket per se, but a special aluminum manifold that the charger bolts to. good luck finding one of those. seems like ess made an e36 kit like that but it was discontinued a few years ago due to high price and lack of sales. i think it was over 8000 dollars. it was a sweet looking manifold, though.

I am more interested in the twin screw design for the power delivery. The Vortex style is just a belt driven turbo, so it has lag and uses up some of the power from the motor.

[White325is]

ok I got a chance to mount the charger and bracket up.
I dont have a ABS pump to check fitment. Im trying to get my hands on one and figure that out for people who asked about it.
Here are a few photos I took. If you need any more let me know...

[flyboyx]

how about some twin screw brackets :twisted:

why would you want this? do you already have a roots type charger in your garage? other than that, i really can't see an advantage. normally, this setup doesn't use a bracket per se, but a special aluminum manifold that the charger bolts to. good luck finding one of those. seems like ess made an e36 kit like that but it was discontinued a few years ago due to high price and lack of sales. i think it was over 8000 dollars. it was a sweet looking manifold, though.

[White325is]

Check back a page, the answer is there for you.

[416stroker]

how about some twin screw brackets :twisted:

Here you go. Look under superchargers.

http://www.bavarianperformance.com/

Im goign to to contact paxton and see if the bolt patterns are the same I know the Novi 2000 is bigger and the 3000 is huge. I have a friend that has both I need to see which one he'l sell me.

[asubimmer]

how about some twin screw brackets :twisted:

[e30polak]

Piping should be interesting for this. Interested to see how this turns out for everyone.

[flyboyx]

white,

tell you what...as long as it clears my abs pump, you can pencil me in for a bracket and spacers as well. just let me know about that asap, ok?

brian

[Mstngcobr761]

haahah.. Yeah, I will need to take payment from everyone before I even tell the machine shop to go ahead and cut them.
I cant afford to have 6 brackets made and 4 people back out and Im stuck paying for the brackets out of my pocket. I did that with header flanges for M20s a few months ago and it bit me in the ass...

Luckily got mine set aside for you lasy paycheck :mrgreen: