Ay

[Danny]

Good tip, thanks friend.

[Adrian_Visser]

I need nuts for to secure my intake manifold but realoem says they're discontinued, anyone know the thread pitch off hand?

Search the P/N on pelican they will give you the P/N that supercedes it automatically. I have no Idea why both bimmerfans and realoem don't do this. Pelican's system is pretty good in that aspect. I found several things that were supposedly discontinued by typing the number into the Pelican search bar.

[Wh33lhop]

I had to get some replacements, IIRC they are 7mmx1mm (flange nuts). Hard to find, even the local specialty tool/fastener place didn't have flange nuts so I had to settle for washers + regular nuts.

Make sure you have a telescoping magnet wand to deal with these, makes things ten times easier.

[Danny]

I need nuts for to secure my intake manifold but realoem says they're discontinued, anyone know the thread pitch off hand?

[Uber E30]

if it is for a 506 silver, no you can't use it in a 413

edit- which 413 do you have? i don't think it work in either one though...

wtf you talking about, 506 chips can be used in 413 reds. Infact the only difference in a 506 and 413 red is the chip itself.

[SamE30e]

Hey Danny,

Fuck you!

Sam

[Danny]

I don't have any ECU, I should be getting a 506 silver label from the guy that sold me the motor once he finds it but if not I'll just snag a 413 as they're more common and cheaper.

[lennon]

if it is for a 506 silver, no you can't use it in a 413

edit- which 413 do you have? i don't think it work in either one though...

[Danny]

Okay here's another question for you guys, I have a Dinan chip part #D900-2941 which is apparently for a 506 DME silver label (From what I've gathered through google) Could I use this in a 413?

[pizzaman]

Yup picked up my s50 today. yayyyyyyyyyyyyyyyyyyyyyyyyyy

Get that mofo in!

[MR 325]

Nice nice nice!

[Danny]

Fantastic, that's what I was hoping to hear. :D

[gregslow318i]

Yup picked up my s50 today. yayyyyyyyyyyyyyyyyyyyyyyyyyy

adapter ships tomorrow, cant wait to see the swap at the picnic this year

[Danny]

Yup picked up my s50 today. yayyyyyyyyyyyyyyyyyyyyyyyyyy

[screwbiedoo15]

S5X swap, Danny? Nice