Help with 24v swap
Collapse
X
-
4.10 is going to be pretty short with a zf320...first will be useless....Leave a comment:
-
folks like the SS replica shit from ebay, that works without any bending. i would go with m52/s52 manifolds though, they're nice and they flow quite well.Leave a comment:
-
good idea. Ill just tape the O2 sensor the the side of the head. Do you think I should use duct tape or something stronger like masking tape?Leave a comment:
-
forget headers all together man. Straight from the head is how I always run my swap cars.Leave a comment:
-
What headers should I run? I need something with good quality and fitment into the e30 chassis. I dont want to deal with having to bend the exhaust to fit. Any suggestions?Leave a comment:
-
ZF320, lightweight flywheel, new sachs clutch, remanufactured M3 driveshaft, and 4.10 diff. Ill probably get the UUC or Rogue engineering short shifter just for kicks and giggles. Cause with that diff and the ZF, Im gonna be shifting every 3 seconds, so might as well get a nice shifter.Leave a comment:
-
Im getting a lot of parts together. I have all the OBD1 parts (thanks blunt!), I had to buy an e30 M3 driveshaft, and Im ordering an e36 steering rack right now. Im also getting a new clutch and manual transmission stuff cause my car is an auto right now. But as of now, the only work done to the engine is the M50 intake manifold, but Im gonna be doing some more work tomorrow. Hopefully all my parts arrive by next friday...Leave a comment:
-

Leave a comment: