91 325i 95 m50tu no start.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • So Live
    replied
    Chip was the issue. Thanks Eduardo

    Leave a comment:


  • So Live
    replied
    Originally posted by EduardoGomez
    Is that the ECU that you ran before and it worked? Silver label requires non silver label chip to work.

    I was under the impression that with the ecu pin 66 cut it would function correctly but i will try to find a non ews chip. Hopefully that works Thanks very much!!

    Leave a comment:


  • EduardoGomez
    replied
    Silver label 413 ECU pin 66 is clipped which is Black/Violet wire
    Is that the ECU that you ran before and it worked? Silver label requires non silver label chip to work.

    Leave a comment:


  • So Live
    started a topic 91 325i 95 m50tu no start.

    91 325i 95 m50tu no start.

    Hey guys seeking a little assistance here. Ive had this car running a few years ago with a NV m50 with no issues. Went to standalone EMS and now am back to a stock 413 ecu and cant get it running.

    I am not getting spark or fuel pressure or signal to injectors.

    So far checked:
    - CPS 540 ohms (at ecu connector). Probing behind the connector and cranking i do get some voltage output
    - Main relay gets power and switches as it should
    - CEL comes on, no codes though
    - Tried jumping FP relay and get nothing at the pump haven't ruled out the wiring between relay and pump but i know i am not getting gnd signal to pin85 and therefore no voltage to pin 87.
    - Could not find "little black box near ABS computer to jumper green wires"
    - Fuel pump works if i hook power directly to the pump and it does make pressure so the lines are correct there...

    Silver label 413 ECU pin 66 is clipped which is Black/Violet wire

    My adapter looks like this:
    E30 E36 E30 Fn
    1 25 Alternator dash light
    2 - OBC Oil static
    3 - None
    4 12 CLT gauge cluster
    5 23 Oil Press light cluster
    6 22 02 relay??
    7 21 Ignition power on Run
    8 24 Fuel Economy cluster
    9 20 Tach signal cluster
    10 - OBC oil level dynamic
    11 19 Service interval cluster
    12 8 CEL control cluster
    13 13 Fuel pump fused
    14 14 road speed
    15 15 Starter
    16 17 Diagnostic plug
    17 -
    18 18 Ignition power on Start
    19 -
    20 -

    Any input would be greatly appreciated. I know there are a lot of threads here on the issue but i haven't been able to find anything useful to my issues...

    Thanks!
    Last edited by So Live; 07-16-2011, 11:16 AM.
Working...