Announcement

Collapse
No announcement yet.

PNP Adapter Harness Wiring for m50, m52, s50, & s52 (And MORE!)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sweet3
    replied
    bump

    Leave a comment:


  • sweet3
    replied
    TeXJ, that’s great that you noticed that. Keep us posted if that solves your issue.

    J171, excellent, I can make one for you. PM replied.

    Leave a comment:


  • J171
    replied
    PM sent..

    I'm looking for a harness adapter from E21 to s52..

    Cheers
    Jay

    Leave a comment:


  • TeXJ
    replied
    Originally posted by sweet3 View Post
    I sell mainly the adapters that join the 24v harnesses to the e30 chassis.
    However, I am also able to modify your 24v harness.
    If you would like, I can take a look at your harness and make sure all of the wiring is fine.
    If you're getting MAF codes, I would suggest looking for vacuum leaks, the smallest leak can trigger a MAF code (such as your oil dipstick oring).
    I had the intake off and was looking at the fuel pressure regulator and noticed that the oil dipstick didn't have a tight fit to the line that goes to the pan.

    Let me look into that more.

    Thank you!

    Leave a comment:


  • sweet3
    replied
    Originally posted by TeXJ View Post
    Question, so I bought the car(in my sig) already swapped. Been having issues mainly with the MAF and not sure it's getting the correct signal.

    So are you selling the engine harness complete or is it an adapter that goes from the factory m52 engine harness to the e30 chassis harness?

    What I'd like is a new engine harness to replace the previous owner's "work".

    m52b28, obd1


    I sell mainly the adapters that join the 24v harnesses to the e30 chassis.
    However, I am also able to modify your 24v harness.
    If you would like, I can take a look at your harness and make sure all of the wiring is fine.
    If you're getting MAF codes, I would suggest looking for vacuum leaks, the smallest leak can trigger a MAF code (such as your oil dipstick oring).

    Leave a comment:


  • TeXJ
    replied
    Question, so I bought the car(in my sig) already swapped. Been having issues mainly with the MAF and not sure it's getting the correct signal.

    So are you selling the engine harness complete or is it an adapter that goes from the factory m52 engine harness to the e30 chassis harness?

    What I'd like is a new engine harness to replace the previous owner's "work".

    m52b28, obd1

    Leave a comment:


  • sweet3
    replied
    bump

    Leave a comment:


  • sweet3
    replied
    bump

    Leave a comment:


  • sweet3
    replied
    Bump

    Leave a comment:


  • sweet3
    replied
    Bump

    Leave a comment:


  • sweet3
    replied
    Bump

    Leave a comment:


  • sweet3
    replied
    Bump

    Leave a comment:


  • sweet3
    replied
    bump

    Leave a comment:


  • sweet3
    replied
    Originally posted by Jokester View Post
    Hey man. I am about to buy a harness adapter for my M54 swap. It is a 91 325i convertible, I am running the e39 harness currently and was wondering about getting the AC wiring for the adapter. It is not listed on the website and is the only thing holding me back from purchasing. Any help would be appreciated.
    Thank you.
    Hi there, thanks for your interest. Iíll send you a PM.

    Leave a comment:


  • Jokester
    replied
    M54 Adapter Harness

    Hey man. I am about to buy a harness adapter for my M54 swap. It is a 91 325i convertible, I am running the e39 harness currently and was wondering about getting the AC wiring for the adapter. It is not listed on the website and is the only thing holding me back from purchasing. Any help would be appreciated.
    Thank you.

    Leave a comment:

Working...
X