Announcement

Collapse
No announcement yet.

PNP Adapter Harness Wiring for m50, m52, s50, & s52 (And MORE!)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    PNP Adapter Harness Wiring for m50, m52, s50, & s52 (And MORE!)

    LIFETIME warranty on workmanship with proof of purchase.
    Want to get your swap finished quicker? These adapters will save you a lot of headaches and hassle.
    All crimp terminals and wiring are new.
    Usually takes 1-2 days for tracking depending on your harness selection.

    http://www.redline-motorsport.com
    You can reach us at: sales@redline-motorsport.com

    All additional options are included in the prices. All standard relays and fuses are included (With an exception of the S54/S62 EKP Module)

    Radiator/Auxiliary fan wiring is now available. This wiring is intended for the E30, E36, or E46 original auxiliary fans. The E30 and E36 fans will need to be used with the 88/80c radiator temperature sensor, part# 61318361787.
    If you have another option in mind, contact us to see if we can provide a harness for your setup.


    ECU Tuning
    $70 shipped or FREE with a harness.

    EWS deletes available for the following:
    . M52TU (MS42)
    . M54 (MS43 B22, B25, or B30)
    . S54 (MSS54 or MSS54HP)
    . S62 (MSS52)

    Additional options:
    . Secondary Air Pump Delete
    . Rear o2 Delete
    . Top Speed Delete
    . VSS removal
    . RPM adjustment
    . Rev limit adjustment

    . Sport Mode Memory
    **Some options are only available for some ECUs.


    You will just need to send us your ECU to be modified.

    --------------------------------------------------------------

    M50, M52(single vanos), S50, S52 (For E36 or E34 engine harness)
    $175 shipped
    *If you plan to use the E39 obd2 harness for the M52(single vanos), please let us know beforehand. These are an additional $25.

    These include the following options:
    . • OBD1 or OBD2
    . • Cluster Temperature Wiring
    . • c104 Wiring (82-87 models)
    Options:
    . • Oil level sensor wiring
    . • A/C input wiring
    . • ABS power wire if you have a 90+ model
    . • Oil temperature wiring if you have an e30 M3 or the e30 M3 cluster
    . • OBD2 diagnostic ports are available as well for the M52 and S52 engines (Special request)
    . • CEL Wiring (Special request)

    --------------------------------------------------------------

    M52TU, M54, S54, M62TU and S62 **The ECUs that are able to be used with these harnesses are the following: MS42, MS43, MSS54/HP, ME7.2, MSS52**
    We can make these for the E46, E39, or Z3M harness.
    $350 shipped

    These include the following:
    . • Cluster temperature wiring
    . • Fuel pump relay wiring (The S54 and S62 typically use Pn# 61357892976. If you rather have a standard relay, please let us know so that we can make that change)
    . • OBD2 diagnostic port
    . • Sport button for the S54 and S62
    . • Electronic pedal connector for the M54, S54, M62TU, and S62
    Options:
    . • CAN-bus wiring for gpeterson's unit (You will need to contact him for a unit)
    . • SAP relay and wiring
    . • Oil level sensor wiring (Except S54, M62TU, or S62) *Unless you request it*
    . • ABS power wire if you have a e30 1990 and newer models
    . • Oil temperature wiring if you have an e30 M3 or the e30 M3 cluster

    EWS must be deleted from your DME.

    --------------------------------------------------------------

    M60, M62 obd1 converted
    $180 shipped

    These include the following options:
    . • Oil level sensor wiring
    . • A/C input wiring
    . • ABS power wire if you have a 90+ model

    --------------------------------------------------------------

    M62 (Post 97) (Intended to be used with the ME5.2.1 ecu, part# 1437284) (5 ECU plugs)
    $275 shipped

    These include the following:
    . • Cluster temperature wiring
    . • Fuel pump relay wiring
    . • OBD2 diagnostic port
    Options:
    . • ABS power wire if you have a e30 1990 and newer models
    . • CAN-bus wiring for gpeterson's unit (You will need to contact him for a unit)

    These DO NOT include A/C wiring.
    EWS must be deleted from your DME.

    --------------------------------------------------------------

    M62 (Pre 97) (Intended to be used with the 474 ECU, Bosch ME5.2) (1 single ECU plug)
    $225 shipped

    These include the following:
    . • Cluster temperature wiring
    . • Fuel pump relay wiring
    . • OBD2 diagnostic port
    Options:
    . • ABS power wire if you have a e30 1990 and newer models

    These DO NOT include A/C wiring.
    EWS must be deleted from your DME.

    --------------------------------------------------------------

    Benchflash harness for MS42, MS43, MSS54/HP, and MSS52
    $45 shipped

    We do offer an ECU benchflash harness to reflash your DME outside of the car.
    It will come with instructions and links for the necessary software.
    It is intended to be used with any 12v power supply. It is suggested to use one that only reaches 5 amps maximum. Otherwise, I suggest to add a fuse to the (+) terminal on the benchflash harness.
    You will just need to get a Galletto 1260 cable and/or the INPA K+DCAN cable. These options are explained in the included instructions.


    For pictures, please refer to the website. We are continuously adding to our website.
    http://www.redline-motorsport.com


    We can make adapters for the E21, E24, E28, E30, E34 and E36 chassis.
    We can make some wiring kits for the E46 and E39 chassis.
    We can make wiring kits for the E9, 1602 and 2002 chassis.
    Last edited by sweet3; 12-04-2019, 11:17 AM.
    PNP Adapter Harness Wiring for M52TU, M54, S54, M60, M62, M62TU, S62, M50, S50, M52, S52 & MORE

    sigpic

    #2
    I think I just bought one from you recently. it's on my build thread. letthebasskick04?????

    Comment


      #3
      Do only the 'e' models require that you run the tach, mpg, and speed signal through the harness?

      Comment


        #4
        I'll definitely jump on this when I'm a little closer to getting my m52 installed.
        Do I need to send you the harnesses or do you use your own?

        Comment


          #5
          Originally posted by NotJesus View Post
          Do only the 'e' models require that you run the tach, mpg, and speed signal through the harness?
          No, there are actually some 87 "i" models that use them as well. An easy way to tell is if you see a 3 pin connector (c104) in your glovebox area. Pin 1 should be black, pin 2 should be red/green, and pin 3 should be yellow/white. If you have this connector, then you will need the extra wires.

          The extra wires are included with the harness (if your model requires it)
          PNP Adapter Harness Wiring for M52TU, M54, S54, M60, M62, M62TU, S62, M50, S50, M52, S52 & MORE

          sigpic

          Comment


            #6
            Originally posted by schmidty View Post
            I'll definitely jump on this when I'm a little closer to getting my m52 installed.
            Do I need to send you the harnesses or do you use your own?
            Excellent, just send me a message whenever you are ready.

            If you want your harness repinned, then you would need to send your own harness.
            If you would just like the adapter harness (like the pictures above), then you wouldnt need to send me your harness.
            PNP Adapter Harness Wiring for M52TU, M54, S54, M60, M62, M62TU, S62, M50, S50, M52, S52 & MORE

            sigpic

            Comment


              #7
              Do you do harnesses for:
              '89 318i (M40b18) adapted to M52 with M50 intake?

              Shipping to Australia required.

              Thanks
              RHD OBD2 M50b25 turbo build thread:
              http://www.r3vlimited.com/board/showthread.php?t=384800

              Comment


                #8
                Originally posted by ba114 View Post
                Do you do harnesses for:
                '89 318i (M40b18) adapted to M52 with M50 intake?

                Shipping to Australia required.

                Thanks
                Yes we can make them for the e30s that had the m40 originally.
                Last edited by sweet3; 04-06-2017, 10:18 PM.
                PNP Adapter Harness Wiring for M52TU, M54, S54, M60, M62, M62TU, S62, M50, S50, M52, S52 & MORE

                sigpic

                Comment


                  #9
                  Bump
                  PNP Adapter Harness Wiring for M52TU, M54, S54, M60, M62, M62TU, S62, M50, S50, M52, S52 & MORE

                  sigpic

                  Comment


                    #10
                    You make a harness adapter for a 1990 bmw 325i m52 swap obd2

                    Comment


                      #11
                      PMed
                      PNP Adapter Harness Wiring for M52TU, M54, S54, M60, M62, M62TU, S62, M50, S50, M52, S52 & MORE

                      sigpic

                      Comment


                        #12
                        Are the 1991 318is harness adapters still for sale. Was going to repin but trying to get it done quick. For a m50nv

                        Comment


                          #13
                          Hi, yes they're still for sale. I'll send you a PM
                          PNP Adapter Harness Wiring for M52TU, M54, S54, M60, M62, M62TU, S62, M50, S50, M52, S52 & MORE

                          sigpic

                          Comment


                            #14
                            Hey, do you have an adapter for '85 318i for s50 swap?

                            Comment


                              #15
                              Hey Im doing a s52 swap in my e30, I need a harness how can I purchase one

                              Sent from my SAMSUNG-SM-G890A using Tapatalk

                              Comment

                              Working...
                              X