Where did you mount your cruise control?

(1) no -- it looks close, but isn't

(2) no abs

[Beej '86 325es]

Here are a couple photos I shot tonight, as I am at this stage right now.

Two issues/questions:
1: Anyone have issues with the reservoir cap hitting the hood? Mine looks close...
2: Did you guys bend your brake line coming out of the ABS unit?

[matt]

yup :)

///Mpressive did the same thing.

Use the stock 325is cruise control bracket.

Has anyone added the mounting bracket/clip for the 325i coolant tank to 325e or m3?

yup :)

[e30ryan///m3]

How does the e30 cruise control unit hook up with the s50 throttle cable? Everything is there, just not hooked up to anything? Any help is appreciated.

Thanks,
Ryan

[Rev Engineer]

Thanks for posting the pic. This is how I'm going to mount mine. Did you bend the old airbox mounting bracket and strap the maf assembly to it? Can't quite tell from the picture. Also, any chance you know the part number for the K&N filter?

Has anyone added the mounting bracket/clip for the 325i coolant tank to 325e or m3?

[NickP]

Here's the pic although it sounds like you've figured it out

[LINUS]

uhh, f u prick..... my 3 cyl works just fine.

Oh, my bad - I guess you only have half the vibration of the 6 cyl guys then -

[cheades]

uhh, f u prick..... my 3 cyl works just fine.

[LINUS]

Passenger side where the e30 M3 coolant resevoir is mounted.

Never would have thought to mount it there...come to think of it I never even knew you had a 6 cyl. I hope you are playin' dickhead. Pbbbbffff. (To anybody keeping score me & Cheades know each other all too well.) I've heard that if you mount your cruise there you end up with driveline vibration that you just can't cure, no matter what you try. FTW.

[cheades]

Passenger side where the e30 M3 coolant resevoir is mounted.

[LINUS]

I mounted mine on the coolant reservoir bottle - there's mounts on it for the three bolts.

After looking at mine I see what you are talking about - this simple to some but even though maybe this should be in the stickied thread up top.

---B

[tonytony]

put mine above the ABS module on the drivers side.

i shoved it towards the fender as much as possible

[LINUS]

I mounted mine on the coolant reservoir bottle - there's mounts on it for the three bolts.

What bottle are you running? I don't see it on mine. Pic?

[netcsk]

put mine above the ABS module on the drivers side.