Originally posted by TheRob
View Post
Announcement
Collapse
No announcement yet.
Z3 M52 in 1991 318is (California BAR)
Collapse
X
-
Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
-
I used the Syncro Design Works downpipe which is designed to work with the stock FCAB's and ends in an S-bend so you can attach you own custom exhaust (they also sell a complete front to back exhaust but I have other plans).
Since you are going to do a BAR cert and need a factory center section, I think you will be limited on clearance and will need to run Treehouse style FCAB's. I have no specific experience with this but many on this forum will and there should be some documented installs.
MJ
Originally posted by fastestbox View PostThat's great news!! I gave up hoping that someone would chime in as it seems like Z3 information is limited. Thank you!
This means it'll fit like the e36 ones, which means I probably need to get some Treehouse style FCABs then?
Comment
-
I have the same setup as MJ. I also have a '97 Z3 m52 in my e30 and am using the stock manifolds. I went through the same search and couldn't figure out why the part numbers were different from an e36. Markert Motor Works used a Synchro Design Works downpipe on mine and had no issues fitting it to the Z3 manifolds.
Comment
Comment