LOL, AMEN to that. I've seen one too many teaser threads. Just post the damn thing up already.
I might make a new avatar just for that... Oh WAIT, I'll post a teaser first......!!!!
Things to b!tch about after you swapped
Collapse
X
-
Eh, this is r3vlimited. You should have just posted a teaser thread in the Member's Rides section with a silhouette of an M50 manifold in an E30 engine bay, in black and white. Maybe add in some pics of a large Ebay intercooler and a rusty blow off valve taken from a 1988 Saab on a concrete floor, and you're GOLDEN.Leave a comment:
-
Never posted them here. I sorta kept my whole deal quiet. I am not one to post a lot of attention-whoring threads.
http://www.tehdriven.com/forum/showthread.php?t=33685 has a lot of them.
Those are from shortly after I got it going. It's running much better now... I drive it back and forth to the shop where the pics were taken (www.racersmarket.net) all the time, despite the 4.10 diff (and e36 trans) and windows that don't go down. Next monday I should be putting in the 3.25LSD that's been sitting on my floor for 5 months.Leave a comment:
-
-
-
-
i also used to run m50 chip on the s50
... then i put in 24#, HFM and proper JimC chip
the difference was astonishing. Recommend!Leave a comment:
-
-
ive got the input shaft noise. my vanos isnt even noticable really until 3500 or so. I've been told that it could be a sign of a bad vanos, but this earlier design is either on or off.Leave a comment:
-
Did everyone just yank their engine out of a donor car and then throw it in their e30? That would have been a perfect time to just replace everything as far as seals and things of that nature would go.Leave a comment:
-
I like most people have the input shaft jiggles on the 260
my rev's drop between shifts slower then I expected
vanos clicks at 2250
other then that I love my m50. But still want more power.Leave a comment:
-
s50 swap here
- lot's of annoying noise (muuuch noisier than m20) good quiet exhaust and plenty of aftermarket sound-deadening should fix that (in progress)
- lots of vibration (but my gf likes it) - actually after getting used to the vibration driving the car all summer, i feel really weird driving the 4cyl acura winterbeater - 0 vibration, feels like the ignition is not on
- too little space to make some good kind of cold air box = heatsoak when hot
- ZF tranny is not the smoothest to shift (even tho i got uuc evo3 with dssr)
- clunks in the driveline (still not sure if it's tranny, shaft, diff or halfshafts or the result of 11lb fly)
- low oilpan scares me
- ticking retainer timebomb
- vanos noise
- tires too thin (205)
but i still frikkin love the carLeave a comment:

Leave a comment: