Things to b!tch about after you swapped

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • skatebline
    replied
    Originally posted by MR 325
    I wish I had some of these problems! My current problem is the engine is still on the stand, lol.

    lol hell yeah i feel that same way!!:p

    Leave a comment:


  • So Live
    replied
    I got mine started :) but turns out the head is cracked. That pissed me off quite a bit. Ill be back when im actually done with it.

    Leave a comment:


  • 325Projectz
    replied
    Learn from our failures!

    Leave a comment:


  • MR 325
    replied
    I wish I had some of these problems! My current problem is the engine is still on the stand, lol.

    Leave a comment:


  • Mr.SWISS
    replied
    Ordered my M50 O2 and a new fan clutch today, sounds like a damn Chevy silverado under the hood when you rev it. :hitler:

    Leave a comment:


  • Mr.SWISS
    replied
    Originally posted by equate975
    TPS is bad, or atleast I hope it is. I can't fucking figure out where all these codes are coming from....

    o2 code, but this is my second new o2, still can't find anything wrong...

    vehicle speed sensor code, I have checked the wiring about 12 times, its all there.

    Alternator died, needs to get rebuilt.

    Never hooked up my reverse lights, oh well I don't care lol.

    Need to un-ghetto-rig my VDO temp sensor, its just on the hot side of the water pump now.

    All I want to know is WHY THE HELL my car "loses power" randomly, AFR goes down the shitter and I lose power, then it kicks back to life....

    Also I might have a fuel pump issue... BLAH!!!!
    Mine started doing the same thing after I put an O2 in, I just slapped the M20 one in for a minute till I can get the correct one.

    Leave a comment:


  • KangamangusDriver
    replied
    Unfortunatly frank, I am still looking for a clean late body shell

    Leave a comment:


  • Garageaholic
    replied
    You're done with your swap adam?

    Leave a comment:


  • KangamangusDriver
    replied
    Find a new shell after totalling my E30

    Remove all parts from totalled car

    Strip shell, send to bodyshop for paint

    Find S52, convert to OBD1

    Buy a big turbo, build motor.

    Install in redone shell

    Be happy again!!!!!!

    Leave a comment:


  • equate975
    replied
    TPS is bad, or atleast I hope it is. I can't fucking figure out where all these codes are coming from....

    o2 code, but this is my second new o2, still can't find anything wrong...

    vehicle speed sensor code, I have checked the wiring about 12 times, its all there.

    Alternator died, needs to get rebuilt.

    Never hooked up my reverse lights, oh well I don't care lol.

    Need to un-ghetto-rig my VDO temp sensor, its just on the hot side of the water pump now.

    All I want to know is WHY THE HELL my car "loses power" randomly, AFR goes down the shitter and I lose power, then it kicks back to life....

    Also I might have a fuel pump issue... BLAH!!!!

    Leave a comment:


  • euroshark
    replied
    "Why the hell did it take 6 months to finish??!"

    "I seriously took the euro motor out of a euro 6 series... with Alpina suspension?? I hope it's worth it..."

    Just general depression really... I never loved the E30s like I love the E24s and E28s, so basically I kind of despise my swap car. It's a beast for sure, but it's kind of a red-headed step child.

    Leave a comment:


  • dougsic
    replied
    Hey, thanks you guys!

    I tried my Peake tool, then just grounding pin 7 so apparently I have a wiring issue.

    EtaSport - you're wlecomed to use my lift in Aberdeen, just let me know.

    Leave a comment:


  • Garageaholic
    replied
    Doug, the SI should easily reset with a jumper wire.

    Find information, resources and relevant links for bmwe30.net. This domain may be for sale.

    Leave a comment:


  • EtaSport
    replied
    that looks better than my exhaust.

    My econo gauge works but its not accurate. You missed wires in your c101, especially if your SI reset doesnt work. Everything in my car works with the exception of the oil level. I have the sensor, but haven't wired it in yet.

    So a lot of my problems disapeared yesterday because of a poor ground connection I had for the engine. I dont have too many complaints as of now with the exception of the squealing starter.

    Leave a comment:


  • dougsic
    replied
    Originally posted by e30_kid89
    well ive found my solution to my idle problem the maf was shot so i still have to:

    -get new maf
    -hook up reverse lights
    -econometer and SI reset not working

    other than that, its great
    I don't think it's possible to have the econometer working.

    My SI isn't resetting either. Just turned from yellow to red and it's making me red looking at it all the time.

    My exhaust is poop.

    But the s50 is more fun than any NA m20 could ever be.
    Attached Files

    Leave a comment:

Working...