Announcement

Collapse
No announcement yet.

Official Mtech 2 Part Numbers

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Official Mtech 2 Part Numbers

    I had a rough time piecing together part numbers and there seemed to be some confusion on the matter regarding which is which for each model


    COUPE:

    here is the correct part numbers for all needed for a coupe (minus trunk spoiler and hardware, can do hardware later if there is demand for it)

    Front Bumper Cover


    Front Spoiler (cant find picture atm)
    51112239709

    Rear Bumper


    Left Sideskirt


    Right Sideskirt


    Door pods







    The front spoiler and rear bumper are sold as "kits" so they include all the necessary hardware to install properly. Everything else (pods,skirts, F bumper) need hardware which must be purchased alone. I have all the part numbers for the hardware listed here.. wont take pics right now because that will take forever. but its all there



    SEDAN:

    I do not have pictures of some of the sedan pieces so I will just post the part numbers. The sideskirts are NLA and my dealer said they are not available anymore



    hopefully i didn't make any mistakes.. kept getting the pics mixed up for some reason

    thanks!

    //Austin
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    #2
    SORRY for any problems with the group buy that I had tried putting together. Feel free to PM me if you would like help with figuring out your kits but I can no longer supply them at the moment due to some outside issues

    here is the correct list of coupe and sedan part numbers that are needed to piece a complete kit (minus trunk spoiler)

    I have read that people are having trouble getting side skirts and door pods? a few months ago my dealer told me that they had plenty of everything, except sedan side skirts. those are officially NLA afaik. Also, a lot of places say that they have them in stock and when you go to place your order they wont process the order because they wont order anymore. Dealer is going to be your best bet and just make sure that your parts guy is patient and doesn't jump the gun saying they don't have any!
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    Comment


      #3
      Excellent work on this, thank you!
      BimmerHeads
      Classic BMW Specialists
      Santa Clarita, CA

      www.BimmerHeads.com

      Comment


        #4
        A these kits direct bolt on with all the mounting hardware lower valance and bumper? Can you just use the mtech2 valance and is bumper if you wanted to go that route?


        Build Thread
        http://www.e30tech.com/forum/showthread.php?t=84988

        "When In Doubt Boost It Out"
        ~89 325I Turbo 11.90 @ 121~
        ~ 420whp/420tq~
        15psi

        ~Paul Burke Built 2.8L Stroked M20
        ~666 Divided Mani T3
        ~6262 T3 Turbo
        ~O'ringed Block SS
        ~Custom Fuel System
        ~3'' Turbo Back
        ~50mm Tial Bov
        ~Dual Tial 38 Gates

        Comment


          #5
          Originally posted by beefjurky69 View Post
          A these kits direct bolt on with all the mounting hardware lower valance and bumper? Can you just use the mtech2 valance and is bumper if you wanted to go that route?
          If you order the 51112239709, front spoiler install kit, it will come with everything to install that. There have been quite a few people that have installed this valence underneath the IS bumper. There was a guy in Europe recently that posted pics of this but i cant remember his user name
          Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

          Comment


            #6
            As long as you have the facelift valance the bumper won't matter. The front M tech spoiler is just a cover that goes over the existing facelift valance.

            Here's an 88 iS with tucked/painted metal bumpers...

            "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

            85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
            88 M3 - LACHSSILBER/SCHWARZE
            89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
            91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER

            Comment


              #7
              FYI I took what I found above and in a couple links to create an Excel spreadsheet for pricing. I already had the main body part and put this together really for hardware only. It lists the part numbers, quantity needed, part name and has columns that when you enter the part price it will add it all up. Kind of easy when comparing against multiple outlets...

              PM with your email address if you'd like a copy! The site won't let me upload it.

              Couple notes:

              1) This is NOT to be taken as the gospel on Mtech II parts; please double check for your needs.

              2) If I made an error please let me know and I'll fix it, don't rip it apart. I'll update it as I can.

              3) Pricing is what I found roughly two weeks ago (8/22/2014) so the prices will fluctuate. Simply put in the new values and it should calculate it for you.

              4) It seems that you CAN most the the Mtech II bits still! I couldn't find the rear bumper in supply though to put on there.

              5) Some items MAY NEED to come from Germany so be prepared to wait!

              6) Many places will pricematch but the deals are where you get free shipping! i.e. Fairfax BMW offers free shipping on orders over $250 I think. So an authentic Mtech II front valance for $355 shipped from Germany. Not bad...

              If anyone has the drilling templates please let me know! I'll be needing those.
              Last edited by PutterMcGavin; 08-29-2014, 07:15 AM.

              Comment


                #8
                FYI I just purchased all new fasteners for my M-Tech 2 kit, lots of stuff breaks on disassembly. I shopped around, and it still cost over $400 so be prepared.

                Gonna look nice though.

                If anyone needs a list of part numbers and quantities, PM me and I'll send you a spreadsheet. Too much to post, if you need individual stuff look at RealOEM.com
                Drive it hard. Maintain it well.


                Convertible Technical & Discussion
                A Topless Memorandum

                Comment


                  #9
                  Originally posted by mr2peak View Post
                  FYI I just purchased all new fasteners for my M-Tech 2 kit, lots of stuff breaks on disassembly. I shopped around, and it still cost over $400 so be prepared.

                  Gonna look nice though.

                  If anyone needs a list of part numbers and quantities, PM me and I'll send you a spreadsheet. Too much to post, if you need individual stuff look at RealOEM.com
                  Yes, the hardware adds up quickly! Especially if you are not reusing anything. I have a list of all the hardware but seem to have lost it somewhere in my garage
                  Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                  Comment


                    #10
                    Here's a link with some additional information for assembling the M-Tech 2 parts

                    http://translate.google.com/translat...3D17%26t%3D449
                    Steve
                    '89 332i
                    '90 M3
                    '01 530is
                    '12 MCS BW
                    '15 RAM 3500

                    Comment


                      #11
                      This is a useful spreadsheet. Has anyone found a online supplier that offers free shipping ?

                      Comment


                        #12
                        Originally posted by xAZxE30x View Post
                        SORRY for any problems with the group buy that I had tried putting together. Feel free to PM me if you would like help with figuring out your kits but I can no longer supply them at the moment due to some outside issues

                        here is the correct list of coupe and sedan part numbers that are needed to piece a complete kit (minus trunk spoiler)

                        I have read that people are having trouble getting side skirts and door pods? a few months ago my dealer told me that they had plenty of everything, except sedan side skirts. those are officially NLA afaik. Also, a lot of places say that they have them in stock and when you go to place your order they wont process the order because they wont order anymore. Dealer is going to be your best bet and just make sure that your parts guy is patient and doesn't jump the gun saying they don't have any!
                        now when you say dealer do you mean bmw dealership parts department?

                        Comment


                          #13
                          Dear all,

                          I am looking for a M-tech II kit for my car (E30 / 320is, MY 1989) here in Portin second hand and consequently I am facing the possibility to get one brand new.

                          I have already seen this kit on BMW OEM parts page. It is not cheap neither is simple for me (rookie in this field) to understand what is the final amount that I will have to deal with. On the other hand I believe that the excel spreadsheet works as a reference and huge help on this issue as all the part numbers and quantities are fully detailed.

                          Can anyone send me that spreadsheet so I can try to get one final price and....do not eat anymore till 2034 to get the amount of money needed? :)

                          Thanks in advance.

                          Regards,

                          Comment


                            #14
                            since you are in europe, your best bet would be to find a kit in germany or england and have it shipped to you. the last time i checked, the rear bumper/valance are no longer available.
                            sigpic
                            Gigitty Gigitty!!!!

                            88 cabrio becoming alpina b6 3.5s transplanted s62
                            92 Mtech 2 cabrio alpinweiss 770 code
                            88 325ix coupe manual lachsilber/cardinal
                            88 325ix coupe manual diamondschwartz/natur
                            87 e30 m3 for parts lachsilber/cardinal(serial number 7)
                            12 135i M sport cabrio grey/black

                            Comment

                            Working...
                            X