eurostyle m tech rear apron

[Jean]

Hmmm

[maniacmatt]

I bought one of these from Eurostyle only for the early model e30.

I was not impressed with the transaction from start to finish. He was incredibly difficult to to get in contact with and it took over a month for me to recieve my valence after I paid for it. As well when it arrived I was not impressed with the quality of the peice at all. There are a number of large bubbles in the piece and one of the corners is fairly rough. I emailed Filip about my concerns with the valence more than a week ago and he has still not replied.

Just thought you might like to know if you are considering his product.

[Tricked 323i]

that looks terrible. you can see your rear valence in the exhaust cutout.

If it bothered you that much just cut off the rear valance or just cut around the exhaust. Problem solved. It is not really that bad as you can tell the apron (the muffler tips are not centered) is not sitting flush as there is no cut out for the tow hook, the right side is hitting the hook.
Kevin

[golde30]

that looks terrible. you can see your rear valence in the exhaust cutout.

[johnwoo]

Dry fitted on my car, it just screws into the fender well lip
Kevin

so it doesn't have any mounts at the bottom of the bumper? sweet im all over that then.

[DSP74]

purchased where?

[Tricked 323i]

anybody know how this mounts. i've been looking at the pics and i was wondering. my rear apron on my '91 is a little bent in coz of my pops. i was wondering if i could get the apron and just cover it up. didn't know if that was doable. let me know guys.

Dry fitted on my car, it just screws into the fender well lip
Kevin

[johnwoo]

anybody know how this mounts. i've been looking at the pics and i was wondering. my rear apron on my '91 is a little bent in coz of my pops. i was wondering if i could get the apron and just cover it up. didn't know if that was doable. let me know guys.