Announcement

Collapse
No announcement yet.

Show me your e30 cupholders!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 968Reckless
    replied
    Originally posted by Tismael711 View Post
    will an E36 console fit the E30? It has cupholders.


    Both e36 and e46 will, they donít look very good where it meets the shifter surround.


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • efficient
    replied
    looks nice^

    Leave a comment:


  • CalypsoBotter
    replied
    I recently started selling very affordable 3D printed cupholders that come in 3 different sizes to suit your needs. They are a press fit into the center console pocket, no tape or screws required.

    $50 to $65 Canadian depending on the model chosen

    Here's some pictures:
    https://imgur.com/a/M2meGI2

    Here's where you can buy them (through secure PayPal):
    https://klassikds.bigcartel.com/

    Leave a comment:


  • crzylildude
    replied
    Here's ours that gets us through the day all the time...
    Attached Files

    Leave a comment:


  • dadsbmw
    replied
    Got a Gearswitch cupholder recently after doing some research. Design wise, its awesome and by far the best choice. I have a 1.5L Nalgene that I take with me everywhere that fits in the front holder and the rear holder gets used for coffee every once in a while. Needed to use all 5 of the silicone dots to fit snugly, but its in there nice and tight.

    There is however a major area that I think needs attention, and that is the finish. These are 3D printed and it is OBVIOUS. None of the pictures I have seen are zoomed in close enough to show the texture of surface, but it appears to be printed by a mid quality 3D printer, which doesnt have the resolution to make it truly smooth. Just seems very cheap to me, especially considering the $100+ price.

    Leave a comment:


  • luke30m
    replied
    FYI the E36 cup holders/center console DOES NOT WORK with E30 M3. I found out the hard way...anyone wants to buy it from me?

    Leave a comment:


  • megatron
    replied
    Hi all, thanks again for all of the support. To give back, we've just signed on as an sponsor of the r3vlimited forums. Formal announcement of that coming up soon, along with some announcements on distributors, overseas shipping, and a few other things.

    We'll be at Bimmerfest East 2015 this weekend if you guys want to say hi and check out the E30 Cup Holder and a few other things in the works. We'll have a some cup holders on hand for sale, and can accept cc via Square. Thanks!

    Leave a comment:


  • megatron
    replied
    Originally posted by cory58 View Post
    Ordered the Gearswitch cup holder on May 26 and it arrived this week. It is awesome. Great construction, professional packaging. I used 2 of the 5 adhesive shims to get it to fit tightly in my center console.

    Would definitely recommend this product.

    Can't wait for the weather to cool down enough for a drive in the 'vert while enjoying a cold drink. Best of all, I get to remove the OEM accessory cup holder that's been attached to the door map pocket and always knocking against my leg.

    Cory




    Your interior is beautiful! Thanks for posting the pictures and for the kind words!

    Leave a comment:


  • megatron
    replied
    Hi guys, to celebrate E30 Picnic Weekend, the GearSwitch E30 Cup Holder is on sale! Use discount code E30_PICNIC for a $10 discount. Code is good through Monday 11:59PM at http://gearswitch.us . If you are going to the E30 Picnic, the sale price applies for units we have on hand for pick up with no shipping.

    Digitally-designed to fit nearly any drink and additively-manufactured from carbon-fiber filled ABS in the USA, the GearSwitch E30 Cup Holder is simply the best cup holder for the E30.

    Leave a comment:


  • ELVA164
    replied
    I'm a big fan of my sfgadgetguy one, only downside is it doesn't hold super big stuff. The looks really match the interior well, though, and it holds pretty much everything I use on a regular basis.

    Leave a comment:


  • cory58
    replied
    +++1 for Gearswitch

    Ordered the Gearswitch cup holder on May 26 and it arrived this week. It is awesome. Great construction, professional packaging. I used 2 of the 5 adhesive shims to get it to fit tightly in my center console.

    Would definitely recommend this product.

    Can't wait for the weather to cool down enough for a drive in the 'vert while enjoying a cold drink. Best of all, I get to remove the OEM accessory cup holder that's been attached to the door map pocket and always knocking against my leg.

    Cory



    Leave a comment:


  • Staszek
    replied
    Originally posted by nhskibm View Post
    Received mine late last week. Aside from initially being impressed with the packaging (it was similar to the packaging on my old Nokia 8800 phone) the finish and quality of the product was top notch.

    Though included with the package was some 3M double sided tape dots the cupholder fit perfectly in my center console without them.

    Fit a (root)beer bottle just fine, my klean canteen, amongst other things.

    Great product, great seller.
    Nice cant wait to get mine!

    Leave a comment:


  • nhskibm
    replied
    Received mine late last week. Aside from initially being impressed with the packaging (it was similar to the packaging on my old Nokia 8800 phone) the finish and quality of the product was top notch.

    Though included with the package was some 3M double sided tape dots the cupholder fit perfectly in my center console without them.

    Fit a (root)beer bottle just fine, my klean canteen, amongst other things.

    Great product, great seller.

    Leave a comment:


  • cory58
    replied
    Originally posted by megatron View Post
    Bumping this old thread to put my company's offering in here, the GearSwitch E30 Cup Holder.

    We just finished a successful pre-sales campaign, and now in production to fill those units. This is direct-digitally manufactured from carbon-fiber ABS composite in the USA and fits anything from Red Bull up to a Nalgene.

    The pre-sale campaign is now completed, but we're still taking orders with a current 3-4 week queue from order to shipment. Happy to answer any questions here or via PM/e-mail. Cheers!

    Website:
    http://gearswitch.us

    Explainer Video:





    This looks promising. Would any satisfied customers like to comment?

    Cory

    Leave a comment:


  • megatron
    replied
    Bumping this old thread to put my company's offering in here, the GearSwitch E30 Cup Holder.

    We just finished a successful pre-sales campaign, and now in production to fill those units. This is direct-digitally manufactured from carbon-fiber ABS composite in the USA and fits anything from Red Bull up to a Nalgene.

    The pre-sale campaign is now completed, but we're still taking orders with a current 3-4 week queue from order to shipment. Happy to answer any questions here or via PM/e-mail. Cheers!

    Website:
    http://gearswitch.us

    Explainer Video:




    Last edited by megatron; 05-15-2015, 03:42 PM.

    Leave a comment:

Working...
X