Announcement

Collapse
No announcement yet.

MkII GTi Recaros in an E30

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jand3rson
    replied
    We may start offering these in addition to the standard brackets (if there's enough interest) very soon.

    A group buy on our R3CARO bracket adapters is coming very soon, I promise!

    Leave a comment:


  • DragonOrta
    replied
    Yay! Brackets! So close to getting good seats in my car finally!

    Leave a comment:


  • Jand3rson
    replied
    Time for an update! Andrew and I just finished the first set of my R3CARO brackets V 2.0. I decided that the fronts were sitting too low, and the lower part of the seat was too flat. So we made a new set of brackets as a prototype for a new design, to raise the fronts and give the lower part some reverse rake. The fronts now sit about 1.5" higher than the rear, and should make for a much more comfortable driving position.







    Leave a comment:


  • dinanm3atl
    replied
    Backseat is hot! Front seats even hotter. Wish I had bought them when they were for sale.

    Leave a comment:


  • M42Technik
    replied
    Originally posted by epyx View Post
    PM Sent
    Replied.

    Leave a comment:


  • epyx
    replied
    Originally posted by M42Technik View Post
    I should mention here that I have the webbing piece shown above if anyone is in need of it. Got it from Capital Seating a while back, have no use for it now...
    PM Sent

    Leave a comment:


  • M42Technik
    replied
    I should mention here that I have the webbing piece shown above if anyone is in need of it. Got it from Capital Seating a while back, have no use for it now...

    Leave a comment:


  • epyx
    replied
    Any update on fitting the VW Recaro rear seat in the e30?

    Leave a comment:


  • Jbpka06
    replied
    remove the two large 17mm bolts on the sides of the seat, one holds the seatbelt and the other has a cap on it. Then remove the 2 pins on the front mounting point on the slider.

    Leave a comment:


  • MikeK
    replied
    Excuse my ignorance, but could someone explain how to disassemble the stock e30 sport seat brackets?
    I bought Janderson's brackets and mounted all of his fabrications to the seat. Now all I need to do is take off the stock brackets off the sport seats to mount it onto my E21 Recaros :( :help:

    Leave a comment:


  • spooledtt
    replied
    Any updates?? I just picked up a minty set of these too!!!

    Leave a comment:


  • elguapo84
    replied
    I am so happy for you! This is killer!!

    Now please get a grey carpet in there...Or Spray your's black (though I believe grey would go best with those seats).

    Same with the rear shelf.

    Also, dye your headliner black and you will have one of the coolest interiors ever!

    Leave a comment:


  • 416stroker
    replied
    ^^ok thanks. I know nothing about VW's

    Leave a comment:


  • der affe
    replied
    Originally posted by 416stroker View Post
    The person still had the rear seat also But It was out of a jetta GLI are they the same?

    How differnt are the mounts?
    Im thinking of snagging the rear also to save $$ on getting mine redone to match the recaros.
    that is the Jetta GLI rear seat. the GTI rear is a split bench/fold down seat back

    Leave a comment:


  • der affe
    replied
    yes, you can unbolt the VW base from there and either buy josh's or make your own adaptor/base from your existing BMW seat base.

    Leave a comment:

Working...
X