Announcement

Collapse
No announcement yet.

Changing seat rails?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jand3rson
    replied
    No problem, I'm glad you were able to follow it.

    Leave a comment:


  • Shaheenem
    replied
    Thanks Mr. Anderson

    Tried it this morning... It was real easy to take the rails off...

    Thanks again.

    Leave a comment:


  • Jand3rson
    replied
    Sport seat and standard seat rails are the same. All of the adjustments for sport seats are components of the seat itself, not the slider rails.

    If my explanation isn't clear enough, post here, and I'll do it again and take some pics for you. It would be a good thing to have here, anyway.

    Leave a comment:


  • TDE30
    replied
    FYI, 2-door seat rails won't work on a 4-door. Ask me how I know.

    Leave a comment:


  • Shaheenem
    replied
    Thanks Nicademus

    Will try it out tonight or the weekend...

    Leave a comment:


  • Nicademus
    replied
    Originally posted by Shaheenem View Post
    Thanks Mr. Anderson

    Will give it a try tonight...

    One more thing... Would my normal comfort seat rails work with the sport seats?

    Thanks again! Much appreciated!
    I'm 99% sure they will. I'd say 100% but I've never done it myself.

    Leave a comment:


  • Shaheenem
    replied
    Thanks Mr. Anderson

    Will give it a try tonight...

    One more thing... Would my normal comfort seat rails work with the sport seats?

    Thanks again! Much appreciated!

    Leave a comment:


  • Jand3rson
    replied
    Originally posted by Shaheenem View Post
    Hey guys

    I recently bought a set of sport seats but the rail on the drivers side is messed up...

    How do i change the rail? Is there a diy somewhere?
    It's actually really easy, we had to do it about umpteen dozen times when we were building my seat adapters for my new seats.

    Remove the large bolt holding the seat belt receiver to the frame, and remove the bolt on the opposite side of it. Remove the seat belt receiver. Get a flat blade screwdriver, and pry the flat metal plate away from the slider bracket, on both sides, and move them up or down out of the way of the bolt holes. Then remove the bar going across the seat brackets that holds the seat covering material out from between the two bolt holes.

    Unclip the thin metal rod that goes between the two sliders, and move it out of the way. For the front attachments, there is a small, cylindrical clip that goes through the bracket in place of a bolt. There is a little tab sticking out of each opposite side of the clip, on the backside of the slider bracket. Get pair of needle nose pliers and a small hammer. Press the 2 little tabs in with the pliers, and tap the clip out from the backside, out of the hole. Do this on both sides. After that, with a little fudging, the slider brackets should come loose from the seat bottom. It will probably take a little work, consider these have probably NEVER been removed.

    Good luck!

    Leave a comment:


  • Shaheenem
    started a topic Changing seat rails?

    Changing seat rails?

    Hey guys

    I recently bought a set of sport seats but the rail on the drivers side is messed up...

    How do i change the rail? Is there a diy somewhere?
Working...
X