CCFL angel eyes installed!

[be34st]

...I'm not sure how I feel about this.

Well to start off you need this for your high beams.

http://www.r3vlimited.com/board/showthread.php?t=52207

Hopefully this will help to make the "Halo" in the high beams more pronounced. If it does, this will look a lot better.

[jink0619]

Camera cant capture a clear pic, this with just the angel highs on.

[jink0619]

^
Will do

Just took some night shots, this is with both angels on

[erik325i]

^
Reason why I dont like them wired to the markers is having to turn them on and off...

Then get out your test light and find a switched 12v wire so it's only powered when ign is on.

[jink0619]

^
Reason why I dont like them wired to the markers is having to turn them on and off...

[Holland]

This took alot of time, precision was key, making sure time of baking, prying out the lens and getting the angels to set in the housing was carefully done. Cleaning up the old glue was a pain! slipped and cut my hand a few time :( wired them up to the side markers

If anyone knows how to wire them to come on when i start up the car without any lights turned on....please share

That should be easy, just wire them to a constant 12v. Something like the ignition.

If you wired them to the side markers, they should be on with the running lights. Best way to do it IMO.

[jink0619]

This took alot of time, precision was key, making sure time of baking, prying out the lens and getting the angels to set in the housing was carefully done. Cleaning up the old glue was a pain! slipped and cut my hand a few time :( wired them up to the side markers

If anyone knows how to wire them to come on when i start up the car without any lights turned on....please share

[Stoner Sam23]

I tried this once. Didn't install because I thought the heat from the high beams would make things toasty.

[jink0619]

Now i'm confused. You get an A for effort but why install them if you only want to run high beams? Did you even wire them?

Thanks for the A for effort! yes their all wired, the lows are just unplugged....it does kinda look bad with all four lit.

[navid41691]

the pic above has just the highbeams lit and thats prolly how im gonna keep it.

Now i'm confused. You get an A for effort but why install them if you only want to run high beams? Did you even wire them?

[jink0619]

what's the purpose of this post without pictures of them lit up?

the pic above has just the highbeams lit and thats prolly how im gonna keep it.

[jink0619]

I think if you left the chrome housing in (if possible) it would've made the ring blend in and not look so bug eyed.

i kinda like bug eye look, its different ....more like transformers autobot eyes:p

[xphiledan]

what's the purpose of this post without pictures of them lit up?

[jink0619]

Whats up with your fogs O.o



I think you should night shade the rings and put crosshairs in the highbeams. Subtle but at night they'll do what they need to do

ebay fogs :(
thats a good idea...maybe when i find some crosshair lenses :p

[jink0619]

It seems like there is too much going on in the front.

Nontheless...all that work, and no pictures of them on during the day/night?

is too much a good or bad thing? I think im just liking to keep the highbeams on.