Maplight mirror bulb?
Collapse
X
-
anyone figure out an led to swap in? I would like to put a subtle red one in -
bumping this up for anyone who needs this information. I found the bulbs for < $4 each:
Leave a comment:
-
I got the lenses from the shop - cutting them at home was not an option in the end - $8 a lens, so $16+ postage?Leave a comment:
-
It wasn't quite end of the weekend. But I do have the lenses now, does anyone want them?Leave a comment:
-
OK, making this happen then. Stay tuned, should have something by the end of the weekend!Leave a comment:
-
im down for new lenses as well, picked up my maplight for 10 bux at the junkyard, lights worked but cracked to shit lenses.Leave a comment:
-
I can do that, start a small production. I'll post in the parts for sale section, for a nominal fee.Leave a comment:
-
^^ mine have never had lens'. Work fine without em. But feel free to make a second set for me when you cut your lexan :-)Leave a comment:
-
Thank you sir. In my case, good time to *replicate* the lenses because the mirror I have on this car doesn't have them. But I have a glass cutter and a sheet of Lexan.Leave a comment:
-
yes small screw driver, gently pry /lift opena at the slot, and lt assbly will come out. you have to remove the contacts at the top to remove the lamp. small philips head screw. uses 12v 10 watt mini halogen. easy to do and good time to clean the lenses.Leave a comment:
-
Bumping this back up - how does one GET to the bulb? Do the little assemblies come out when you stick a screwdriver in the slot? If so I may have to get more energetic.Leave a comment:
-
Yep, that's the one! Also grab them from the rear C-pillar lights too! :)Leave a comment:
-
Yeap, we are parting an e34 today plenty of bulbs...:)Correct bulb is OSRAM 64113, not 64111.
Example - http://www.atlantalightbulbs.com/eca...0W12VOSRAM.htm
You can get them from the e32/e34 map lights as well :)Leave a comment:

Leave a comment: