need help finding ground for radio.
Collapse
X
-
The tach signal is AC voltage, so you can't use a test light to test it.Leave a comment:
-
is there a way to check if the tach is getting a signal with a test light Still having problems with it I have swapped in two working SI boards and it is still not working.Leave a comment:
-
If you own an E30, you need one.
Now go kick its ass!
LukeLeave a comment:
-
-
-
Picking one up today. I have never had a need for one before.Leave a comment:
-
Hell, solder some wires on a lightbulb for all I care, get a testlight!Leave a comment:
-
What wire lights up your test light when you turn the key on?Leave a comment:
-
What color should the 12v acc be? on the diagram it has it as purple and grey but I don't have a purple and grey wire. thinking that this is the problem.Leave a comment:
-
-
^ word. The stock e30 ground sucks anyways. I still have a/c hum and I cant figure out how to get rid of it. Any suggestions would be greatly appreciated.Leave a comment:
-
Why don't you just ground it to the metal cage that holds the headunit in place just sand it well and put the wire under a boltLeave a comment:
-
Definitely good advice and you would also thing just good old common sense.
Trouble is this guy, like a lot out there, would not know what to do with a test light.Leave a comment:

Leave a comment: